Loading ...
Loading ...
Loading ...
Conversion to another type of gas
*INSTALLATION*
67
Changing the small jets
Remove the burner components.
Unscrew the burner's fixing screws.
Pull the control knob off.
Loosen the fixing nuts on the
underside of the appliance.
Carefully remove the underside of the
appliance.
a
c
b
a
Ignition switch
b
Small jet with smaller diameter
c
Small jet with larger diameter
Remove the ignition switch.
Using a small screwdriver, unscrew
the two small jets in the gas
fitting.
Pull out the jets with a pair of pliers.
Fit the correct jets securely (see jet
table).
Secure the jets against inadvertent
loosening with sealing wax.
Checking operation
Check all gas fittings for leaks.
Reassemble the cooktop.
Ignite all burners to check that they
are operating correctly.
– The flame must not go out on the
lowest setting, or when the control is
turned quickly from the highest to the
lowest setting.
– On the highest setting, the flame
must have a distinctive and visible
core.
Adhere the label supplied with the
jets over the old label stating the type
of gas being used.
Loading ...
Loading ...
Loading ...