Loading ...
Loading ...
Loading ...
Operation
67
Cleaning the steam oven
Risk of injury due to hot water.
At the end of a steam cooking
programme, hot water left in the
steam generator is pumped back into
the water container.
Take care not to tip the water
container when taking it out of the
appliance.
Remove the water container as
required.
Remove the spill guard and empty
the water container.
After each use, clean and dry the
whole appliance as described in
“Cleaning and care”.
Make sure the spill guard engages
correctly when installing it.
Leave the appliance door open until
the oven interior is completely dry.
Refilling the water
If water needs replenishing during the
cooking programme, a tone will sound
and the display will prompt you to refill
the container with fresh water.
Remove the water container and fill it
with fresh tap water.
Push the water container into the
appliance.
The cooking programme will continue.
Changing values and settings
for a cooking programme
Depending on the function, as soon as
a cooking programme is in progress,
you can change the values or settings
for this programme.
Depending on the function, you can
change the following settings:
– Temperature
– Power level
– Duration
– Finish at
– Start at
Changing the temperature
You can also permanently reset the
recommended temperature to suit
your cooking preferences. See
Settings| Recomm. temperatures.
Touch the temperature display.
Change the desired temperature.
Confirm with OK.
The cooking programme will restart with
the new target temperature.
Loading ...
Loading ...
Loading ...