BLUETOOTH AND NOISE CANCELING BASIC INDICATION
QUICK SETUP GUIDE
Insignia Noise-Canceling
Over-Ear Headphones
NS-AHBTOENC/NS-AHBTOENC-C
PACKAGE CONTENTS
• Bluetooth Noise-Canceling Headphones • USB charging cable
• 3.5 mm audio cable • Quick Setup Guide
FEATURES
• Noise canceling technology helps block out external noise
• Bluetooth lets you make wireless connections
• Rechargeable battery provides up to 20 hours of music playback with ANC, or up to 40 hours without ANC
• Built-in microphone to make phone calls
• Foldable design allows for easy, compact storing
• Earcup controls adjust volume and change audio tracks
CHARGING YOUR HEADPHONES
• When the red indicator LED blinks three times every ve minutes and the voice prompt says “battery low,” you need to charge the battery.
Plug the charging cable into your computer or adapter and into the micro USB port on your headphones. The red LED turns on to indicate
that the battery is charging and turns o when fully charged.
USING WITH THE 3.5 MM AUDIO CABLE
You can use your headphones with non-Bluetooth enabled devices or on airplanes (in which the use of Bluetooth may be restricted) by taking
advantage of the headphones’ audio jack.
• Connect the 3.5 mm end of the included audio cable to the headset’s audio jack and the 3.5 mm end to the audio device’s headphone jack.
Notes:
• Corded operation does not require battery power for music listening.
• The Bluetooth, microphone, and digital sound enhancement will not work via the audio cable.
• Finish your call before connecting to the audio jack.
USING YOUR HEADPHONES
Turning your headphones on and o
1 Place the headphones around your head.
2 Press and hold (power button) more than two seconds. The LED blinks blue (when turned on) or red (when turned o) and the voice
prompt says “Power on” or “Power o”.
PAIRING YOUR HEADPHONES
Notes:
• Range is 33 feet (10 meters) • Prompts you by saying “Your device is connected,” when connected
• Supports easy pairing • Supports a battery indicator icon on an iOS device
Pairing with a cell phone or MP3 player
1 With your headphones turned o, press and hold (pairing button) for four seconds. The blue and red LEDs blink alternately.
2 On your phone or MP3 player, select INSIGNIA NS-AHBTOENC from the list of discovered devices, then enter the password 0000 (four zeros) (if
required) to pair your headphones.
For more information on pairing Bluetooth devices to your cell phone or MP3 player, see the device’s documentation.
Note: After your headphones have been successfully paired with the cell phone or MP3 player, your headphones will automatically reconnect to the phone or MP3 player.
Before using your new product, please read these instructions to prevent any damage.
ACTION
Power on
Power o
Pairing mode
Noise canceling on
Noise canceling o
Play/Pause
Volume Up/Down
Next/Previous track
Answer call
Ending call
Reject call
Redial
Monitor on
Monitor o
Voice assistant
3.5 mm audio jack
Micro USB port
OPERATION
Press and hold the (power button) more than two seconds.
Press and hold the (power button) more than three seconds.
Press and hold the (pairing button) more than four seconds in power o mode.
Press and release the ANC (Active Noise-Canceling) button to enter the ANC mode.
Press and release the ANC button to exit the ANC mode.
Double-tap the touch pad with one nger or press and release the button.
From the middle of the touchpad, slide a nger towards + or -.
From the middle of the touchpad, slide a nger towards < or >.
Double-tap the touch pad with one nger or press and release the when a call
is incoming.
Double-tap the touch pad with one nger and release the touch pad or press and
release the when a call is nished.
Long hold the touch pad or press the for more than two seconds, then release
when a call is incoming.
Double-press the to redial the last phone number.
Press and release the monitor button to enter the monitor mode.
When the monitor mode is o, press and hold the touch pad with your palm or more
than two ngers to enter monitor mode.
Press and release the monitor button to exit the monitor mode.
Press and hold the touch pad with one nger for two seconds to hear the voice
assistant.
3.5 mm audio cable connection to the phone or computer to listen to music when
power o.
Plug the micro USB connector into this port to charge your headphones.
LED INDICATION
Blue LED lights for 1.5
seconds
Red LED lights for 1.5
seconds
Blue and red LEDs blink
alternately
Green LED on
Green LED o
LED o
LED o
LED o
LED o
LED o
LED o
LED o
Orange LED on
Orange LED o
LED o
LED o
Charging LED on
SOUND
“Power on”
“Power o”
Two short beeps
“ANC on”
“ANC o”
Two high beeps for
maximum volume
One long beep
Two long beeps
Two long beeps
Two short beeps
“Monitor on”
“Monitor o”
Monitor/ANC microphone
Touchpad
LR
Monitor button
Monitor LED
Indicator LED
(Power/Pairing/Play/Pause) button
Noise Canceling LED
Noise canceling (ANC) button
3.5 mm audio jack
Micro USB port
Charging LED
Microphone
Front view Right side view
Left side view
LR
R
Loading ...
Loading ...
Loading ...
