BLUETOOTH INDICATIONS
CHARGING YOUR STEREO HEADPHONES
When the red indicator LED blinks three times every minute and the voice prompt says “battery low,” the
battery is low. To charge the battery, plug the charging cable into your computer and into the micro USB
port on your headphones. The red LED turns on to indicate that the battery is charging and turns o when
fully charged.
(talk/play/pause) button
During phone calls, press to talk.
+ Volume Up/Next Track
Press the + button to increase the volume.
Press and hold the + button for one
second to skip to the next track.
– Volume Down/Previous Track
Press the – button to decrease the volume.
Press and hold the – button for one
second to skip to the previous track.
Indicator LED
Shows current status of your headphones.
(power/pairing) button
Press to turn on your stereo headphones.
Press to pair your headphones with a
Bluetooth enabled device.
Microphone
Allows you to talk during calls.
Right inside view
Final at size: 23.62 × 5.5 in. (600 × 139.7 mm)
Final fold size: 5.9 × 5.5 in. (150 × 139.7 mm)
QUICK SETUP GUIDE
Bluetooth In-Ear
Headphones
NSHNECKPLUS
PACKAGE CONTENTS
• Bluetooth in-ear headphones
• Two additional pairs of earbuds (small & large sizes)
FEATURES
• Comfortable around-the-neck design
• Retractable earbuds for easy storage and transport
• Rechargeable batteries provide up to 12 hours of music playback
• Built-in microphone for phone calls
• Remembers up to eight dierent devices
USING YOUR STEREO HEADPHONES
Turning your stereo headphones on and o
1 Place the headphones around your neck and put the earbuds in your ears.
2 Press and hold (power button) more than two seconds. The LED blinks blue (when turned on)
or red (when turned o) and the voice prompt says "Power on "or "Power o".
PAIRING YOUR STEREO HEADPHONES
Notes:
• Range is 33 feet (10 meters)
• Supports easy pairing
• Prompts you by saying “Your device is connected,” when connected
• Supports a battery indicator icon on an iOS device
• Prompts you by saying “Your device is disconnected,” when the bluetooth device disconnects.
Pairing with a cell phone or MP3 player
1 With your stereo headphones turned o, press and hold (power button) for four seconds. The
blue and red LEDs blink alternately.
2 On your phone or MP3 player, select INSIGNIA NS-HNECKPLUS from the list of discovered devices,
then enter the password 0000 (four zeros) (if required) to pair your headphones.
For more information on pairing Bluetooth devices to your cell phone or MP3 player, see the device’s
documentation.
Note: You only have to pair a device once. Your headphones store the device information and automatically
reconnect to the device.
• USB charging cable
• Quick Setup Guide
Right outside view
Before using your new product, please read these instructions to prevent any damage.
Indicator LED
Shows battery charging status.
Micro USB port
Plug the micro USB connector
into this port to charge your
headphones.
Earbud
Let’s you hear
sound through
the headphones.
Right bottom view
ACTION
Power on
Power o
Pairing mode
Play/Pause
Volume Up/Down
Next Track/Previous Track
Incoming call
Answer call
Reject call
Redial
Reset device list
OPERATION
Press and hold (power button) more
than two seconds
Press and hold (power button) more
than three seconds
Press and hold (pairing button) more
than four seconds in power o mode
Press and release button
Press and release + or – button
Press and hold + or – button
Press (talk button) when a call is
incoming
Press and hold (talk button) when a
call is incoming
Double press (talk button)
In power o mode, long press
(power button) more than six seconds
LED INDICATION
Blue LED lights for 1.5 seconds
Red LED lights for 1.5 seconds
Blue and red LED blinking alternately
LED o
LED o
LED o
LED o
LED o
LED o
LED o
Red LED lights for two seconds
SOUND
“power on”
“power o”
Two short beeps
Two high beeps for
maximum volume
Rings and vibrates
every two seconds
One long beep
Two long beeps
Two short beeps
Vibrates for two
seconds
NS-HNECKPLUS_18-0449_QSG_V1_EN.ai 1 8/30/2018 10:55:17 AMNS-HNECKPLUS_18-0449_QSG_V1_EN.ai 1 8/30/2018 10:55:17 AM
Loading ...
