Loading ...
Loading ...
Loading ...
en Water softening system/special salt
12
Overview of menu
The dishwasher has been preset with
certain settings for your convenience.
The settings can be found in the
individual chapters. You can change
these factory settings.
--------
+ Water softening
system / special salt
Wat e r sof t eni ng sy st em/speci al sal t
To ensure good rinsing results, the
dishwasher requires soft water, i.e.
water which is low in lime, otherwise
limescale will be deposited on the
utensils and interior container. Tap
water above 7° dH (1.2 mmol/l) must
be softened. The water is softened with
special salt (regeneration salt) in the
water softening system
of the dishwasher. The setting and
therefore the required amount of salt
depends on the degree of hardness of
your tap water (see following water
hardness table).
Water hardness table
Setting up Factory setting Description
• Water hardness
•:‹‹ - •:‹ˆ
•:‹… Setting water hardness. When using
Multitabs, select the lowest setting.
§ Rinse aid
§:‹‹ - §:‹‡
§:‹† Amount of rinse aid affects drying. When
using Multitabs, select setting 0.
š ExtraDry
š:‹‹ - š:‹‚
š:‹‹ / Off Improved drying for glasses and plastic
tableware.
‘ Hot water *
‘:‹‹ - ‘:‹‚
‘:‹‹ / Off The dishwasher can be connected to
either hot (40-60°C) or cold water
(<40°C).
˜ Auto Power Off
˜:‹‹ - ˜:‹ƒ
˜:‹‚ Appliance automatically switches off at
the end of each wash.
* depending on the configuration of your specific dishwasher
¯¯
¯³
¯
¯´
¯
¯
¯±
¯Å
:DWHU
KDUGQHVV
YDOXH
&ODUNH
VRIW
PHGLXP
KDUG
Ȣ
Ȣ
Ȣ
Ȣ
Ȣ
Ȣ
Ȣ
Ȣ
PPROO
Ȣ
Ȣ
Ȣ
Ȣ
Ȣ
Ȣ
Ȣ
Ȣ
6HWYDOXH
RQWKH
PDFKLQH
+DUGQHVV
UDQJH
KDUG
KDUG
PHGLXP
PHGLXP
VRIW
Loading ...
Loading ...
Loading ...