Loading ...
Loading ...
Loading ...
4
Install Leveling Legs
The Gladiator
®
Modular GearBox is designed to be either stationary
or to roll on casters. To order the Gladiator
®
Steel Modular GearBox
Caster Kit, see “Accessories.”
1. Place the cabinet on its side.
2. Screw a leveling leg (P7) into each of the four rivet nuts located at
the corners of the cabinet as shown.
3. Stand the cabinet upright.
4. If you have not already, fasten the two bolts at each front corner,
of the cabinet frame. Completely tighten all the cabinet bolts and
nuts.
Assemble Drawer
IMPORTANT:
■ Position the drawer sides so that the glides are at the top and
facing the outside.
■ Do not fully tighten the six screws attaching the drawer back to
the sides.
1. Using three Phillips-head screws (F3s), attach the side (D1) to the
back (D2) as shown.
NOTE: Working from the back, insert the screws through the
drawer back and then into the drawer side.
2. Using three Phillips-head screws (F3s), attach side (D3) to the
back (D2) as shown.
NOTE: Working from the back, insert the screws through the
drawer back and then into the drawer side.
3. Working from the top, set the drawer bottom (D4) down onto the
back and side flanges as shown.
4. Working from the bottom, insert screws through the drawer back
and sides and then into the drawer bottom.
NOTE: Wait until the drawer front is in place before inserting the
screws that attach the drawer bottom to the front.
5. Using nine Phillips-head screws (F3s), attach the drawer front
(D5) to the bottom and sides.
6. Before you insert the drawer into the cabinet, make sure the
bearing carriages on the cabinet slides are at the front of the
cabinet.
7. Align the drawer glides with the slides on the inside of the
cabinet. Insert the drawer glides into the slides and push the
drawer into the cabinet.
NOTE: If the drawer glide is not correctly aligned with the cabinet
slide, the drawer may become lodged in the cabinet. Facing the
cabinet, press down on the lever located on the right-hand
drawer glide while pressing up on the lever located on the left-
hand drawer glide to release the drawer.
A. Leveling legs
F3s
F3s Phillips-head screw (22 - silver)
A
P4
P1
P7
P6
A. Drawer glide lever
D4
D2
D3
D1
D4
D2
D3
D1
D5
A
Loading ...
Loading ...
Loading ...