TRX500FA5 Owner's Manual

Loading ...

Instruments & Controls

Indicators & Displays

The digital clock (1) shows time with the clock mark (2) when the

ignition switch is ON (q).

To adjust the time, proceed as follows:

Turn the ignition switch ON (q) and select the digital clock mode.

Press and hold the mode select button (3) until the display start

blinking.

To advance the display 1 minute at a time, press and release the

mode select button for 0.5 seconds.

Press and hold the mode select button the display will begin

advancing fast. Press and hold the button for:

• 0.5 – 5.5 seconds: advance one minute at a time.

• 5.5 – 10.5 seconds: advance five minutes at a time.

• 10.5 seconds or more: advance ten minutes at a time.

Release the mode select button when the display reaches the

desired time.

To end the adjustment, press and release the mode select button

for less than 0.5 seconds or turn the ignition switch to OFF (w).

After the battery is reconnected (page 196), check the clock.

Readjust the clock if necessary.

Digital Clock

(3) mode select button

(1) (2)(3)

(1) digital clock

(2) clock mark

19 TRX500FA5 FA6-FA7 31HR6640.book Page 27 Friday, May 4, 2018 10:57 AM

Loading ...

Owner's Manual - Page 37