Loading ...
Loading ...
Loading ...
PROBLEM POSSIBLE CAUSE
SURFACE UNITS • The surface units are not plugged in solidly.
NOT FUNCTIONING
• The surface unit controls are not properly set.
“F–AND A NUMBER” • If the time display flashes “F–and a number”, you have function error code.
FLASH IN THE DISPLAY If a function error code appears during the self-cleaning cycle, check the oven
door latch. The latch may have been moved, even if only slightly, from the
latched position. Make sure the latch is moved to the right as far as it will go.
Turn the Oven Temperature knob to OFF. Allow the oven to cool for one hour.
Put the oven back into operation.
• Disconnect all power to the range for 5 minutes and then reconnect power.
If the failure code repeats, then call for service.
THE DISPLAY GOES BLANK • Disconnect power to the range at the fuse box or circuit breaker for at least
OR INDICATOR LIGHTS 10 seconds. Turn power on and power up your range. If the indicator lights are
COME ON WHEN THE still on, call for service.
RANGE IS NOT IN USE
OVEN LIGHT • Light bulb is loose or defective. Tighten or replace.
DOES NOT WORK
• Switch operating oven light is broken. Call for service.
OVEN WILL • Plug on range is not completely inserted in the electrical outlet.
NOT WORK
• The circuit breaker in your house has been tripped, or a fuse has been blown.
• Oven controls not properly set.
• Door left in locked position after cleaning.
FOOD DOES NOT • The Oven Temperature knob not set at BROIL.
BROIL PROPERLY
• Door not left open to the broil stop position as recommended.
• Improper shelf position being used. See the Broiling Guide.
• Food is being cooked on hot pan.
• Cookware is not suited for broiling.
• Low voltage. See the Broiling section.
• Aluminum foil used on the broil pan grid has not been fitted properly
and slit as recommended.
FOOD DOES NOT • The Oven Temperature knob not set correctly.
ROAST OR BAKE
• Shelf position is incorrect. See the Roasting or Baking sections.
PROPERLY
• Oven shelf not level.
• Incorrect cookware or cookware of improper size is being used.
• Oven thermostat needs adjustment. See the Adjust the Oven Thermostat—
Do It Yourself section.
CLOCK AND TIMER
• Make sure the electrical plug is plugged into a live, properly grounded
DO NOT WORK
power outlet.
• Check for power outage.
• Review the Oven Control, Clock and Timer section of this guide.
OVEN WILL NOT
• Oven temperature is too high to set self-clean operation. Allow the range
SELF-CLEAN
to cool to room temperature and reset the controls.
• Oven Temperature knob not set to AUTO SELF CLEAN.
• Door latch handle not moved all the way to the right.
QUESTIONS?
USE THIS PROBLEM SOLVER
32
Loading ...
Loading ...
Loading ...