Loading ...
Loading ...
Loading ...
25
Operating the Self-Cleaning Oven
How to Set Delay Start of Cleaning
Delay Start is setting the Oven Control to start the
clean cycle automatically at a later time than the
present time of day.
For example: Let’s say it is 7:00 and you want the
oven to begin self-cleaning at 9:00 after you’re
finished in the kitchen. The oven is just soiled a
normal amount so the normal Clean Time of 4 hours
and 20 minutes is preferred.
1. Follow steps to prepare the oven for cleaning.
2. Slide the latch handle to the
right as far as it will go. If
the latch does not slide it
may not be fully extended
from the Hide-A-Way
position. Lift the cooktop
and make sure the handle is to the left as far as it
will go. Pull the handle out. Lower the cooktop and
slide the handle to the right in the lock position.
Never force the latch handle. Forcing the
handle will damage the door lock mechanism.
3. Turn the Oven Temperature knob to the AUTO
SELF CLEAN position.
4. Press the START TIME pad.
5. Press the HOUR pad until 9:00 appears in
the display. The timer is now set to start
cleaning in 2 hours, at 9:00.
The Self-Clean Cycle will be set to
automatically begin at 9:00 and finish
at 1:20.
Both the OVEN ON light and the AUTO
SELF CLEAN light will flash when the
Clean Time is finished.
6. When both the OVEN ON and the AUTO SELF
CLEAN lights flash, slide the latch handle to the
left as far as it will go, turn the Oven Temperature
knob to OFF and open the door.
Never force the latch handle. Wait until the AUTO
SELF CLEAN light flashes and the latch slides easily.
Forcing the latch handle may damage the door lock.
(continued next page)
HOUR
START
TIME
Easy Steps:
1. Latch the door.
2. Turn the Oven Temperature Control knob to
AUTO SELF CLEAN.
3. Press the START TIME pad.
4. Press the HOUR and MIN. pads to set the
time of day you want cleaning to start. The
Self-Clean Cycle will automatically begin at
the time you selected.
Loading ...
Loading ...
Loading ...