Loading ...
Loading ...
Loading ...
21
MAKING CAPPUCCINOS AND MILK-BASED COFFEES
Note: to avoid milk with poor froth or large bubbles, always clean the milk container lid
and hot water connection nozzle as described in sections ‘Cleaning the milk container’
and ‘Cleaning the steam wand connection nozzle’.
Filling and attaching the milk container
1
Remove the lid.
Note:
●
For a denser and more even froth, use refrigeratored milk at about 5°C temperature.
●
If ‘Energy Saving’ mode is enabled, you may have to wait a few seconds before the
drink is delivered.
2
Fill the milk container with a sufficient quantity
of milk, not exceeding the MAX level marked
on the container. Each mark on the side of the
container corresponds to about 100ml of milk.
3
Make sure the milk intake tube is
correctly inserted in the bottom
of the milk container lid.
4
Place the lid back on the milk container.
5
Remove the steam wand.
6
Attach the milk container to the
connection nozzle and push as
far as it will go. The appliance
will beep (if the beep function
is enabled).
7
Place a cup under the coffee spouts and
milk spout. The length of the milk spout is
adjustable. To move it closer to the cup,
pull it downwards.
Loading ...
Loading ...
Loading ...