Asko DC7774 User Manual

Loading ...

PROCEDURE

The setting parameters according to the list on page 21 are shown on the display as follows:

the current parameter is shown on the top row of the display, e.g. P 2014,

the set value of the parameter is shown on the bottom row.

1 Go to programming mode. See page 20.

2 Step through to the relevant parameter by pressing the ARROW UP or DOWN buttons repeatedly. If

you go too far, just continue until the display shows the correct parameter.

3 When the display shows the correct parameter, e.g. “P 2012”, press OK to conrm.

The row will then ash with the set value of the parameter.

4 Increase or decrease the value by pressing the ARROW UP or DOWN buttons.

5 To save the set value, press OK.

6 To return to operating mode, press DOWN ARROW and then S T O P.

RESTORING TO FACTORY SETTING

1 Go to programming mode as described on page 20.

2 Hold down the ARROW UP and ARROW DOWN keys simultaneously and press OK.

The factory settings will be saved and the display will show the last run programme.

Loading ...

Asko DC7774 Drying Cabinet