Loading ...
Loading ...
Loading ...
en Sensors
32
■ Do not leave any items of laundry in
the drum. They may shrink in the
next wash or discolour another item.
■ Remove any foreign objects from the
drum and the rubber seal – risk of
rusting.
■ Wipe the rubber seal and the
washing machine door dry.
■ Leave the door and detergent
drawer open so that any residual
water can evaporate.
H Sensors
Sensors
Automatic load sensing
The automatic load-sensing function
perfectly adapts the water consumption
to each programme depending on the
type of fabric and the load.
Unbalanced load detection
system
The automatic unbalanced load
detection system detects imbalances
and ensures even distribution of the
laundry by repeatedly starting and
stopping the drum spinning.
If the laundry is extremely unevenly
distributed, the spin speed is reduced
or the spin cycle is not performed for
safety reasons.
Note: Place large and small items of
laundry evenly in the drum.
~ "Faults and what to do about them"
on page 37
Q Appliance settings
Appliance settings
You can change the following settings:
■ The volume of the information
signals (e.g. at the end of the
programme) and/or
■ The volume of the button signals
and/or
■ Switch on or off the drum clean
reminder
*
.
In order to change these settings you
will need to activate the setting mode.
Activating the setting mode
1. Turn the programme selector to
position 1. The washing machine is
switched on.
2. Press the Start Reload A button
and, at the same time, turn the
programme selector clockwise to
position 2. Release the button.
* depending on the model
1/2/3/4... positions on the
programme selector
Loading ...
Loading ...
Loading ...