Loading ...
Loading ...
Loading ...
Adjustments for Competition 95
Front Suspension Adjustments
4. Remove the front axle nut (3).
5. Pull the front axle shaft (4) out of the wheel
hub and remove the front wheel.
(3) front axle nut (4) front axle shaft
6. Remove the fork protectors (5) and brake
caliper (6).
• Do not support the brake caliper by the brake
hose.
• Do not operate the brake lever after the front
wheel is removed. To do so will cause
difficulty in fitting the brake disc between the
brake pads.
(5) fork protectors (6) brake caliper
7. Loosen the fork bridge lower pinch bolts (7),
then pull the fork legs down and out.
(7) fork bridge lower pinch bolts
8. Clean the fork assembly, especially the sliding
surface of the slider pipe (8) and dust seal (9).
The fork tube (10) can drop on the slider and
damage the fork dust seal and guide bushing (1 1)
when the fork cap is removed. To avoid damage
hold both the fork tube and slider pipe when
removing the fork cap.
(8) slider pipe (10) fork tube
(9) dust seal (11) guide bushing
9. Record the rebound damping adjuster position
and turn the adjuster screw (12) counterclockwise
until it stops.
10. Hold the fork tube (10), then remove the
fork cap (2), from the fork tube. Gently slide
the fork tube down onto the lower end of the
slider pipe (13).
(2) fork cap (12) adjuster screw
(10) fork tube (13) slider pipe, lower end
When removing the fork cap, be careful not to
damage the damping force adjuster needle rod
(14) and the needle on the rod end.
11. Remove the fork cap (2) from the piston
rod (15) by holding the lock nut (16).
12. Remove the fork spring (17).
(2) fork cap (16) lock nut
(14) adjuster needle rod (17) fork spring
(15) piston rod
NOTICE
NOTICE
(6)
(5)
(3)
(4)
(10)
(8)
(9)
(7)
(2)
(10)
(11)
(12)
(13)
(10)
(2)
(14)
(17)
(16)
(15)
(cont’d)
Loading ...
Loading ...
Loading ...