Loading ...
Loading ...
Loading ...
20
CLEANING MODES
after the power supply is turned off.
select the mode. Cleaning will then start from the beginning.
obstacles. This may be caused by a reflective or dissimilar surface, or a compromised
lower infrared sensor.
Tip
operation to clean each and every spot in the
cleaning area.
If you need to quickly clean an area choose
'Start' button.
※
In 'Cell by Cell' mode, Robot Cleaner cleans the
area by dividing it into rectangular spaces.
For meticulous cleaning, select this mode.
select 'Cell by Cell' mode and press 'Start' button.
The 1st stage:
The maximum outline of 3 m x 3 m of cleaning
area will be cleaned. (The size of the outline
may vary in accordance with the shape of the
area to be cleaned.)
The 2nd stage:
The 2nd stage of Cell by Cell cleaning engages
When the 1st, and 2nd stages are completed, the
cleaned area will be cleaned again through the
repetition of the above cleaning method as the
device advances to the next part of cleaning area.
Zigzag Cleaning
Cell by Cell Cleaning
Loading ...
Loading ...
Loading ...