Loading ...
Loading ...
Loading ...
17
HOW TO START AND STOP CLEANING
For best results:
the Robot Cleaner.
can rapidly be returned to the home station as the current home position has been
accurately read.
nd
contamination from the contaminated
mop, it will not go over door sills of 5 mm or higher.
Tip
After the Robot Cleaner main power switch is turned on, press
the START/STOP button to begin cleaning. A melody will sound
and cleaning will begin.
Press the START/STOP button during the cleaning cycle to stop
cleaning.
※
supply of the Robot Cleaner is in Standby, the power will be
start cleaning.
After the Robot Cleaner is turned on from the Robotic Cleaner,
press the START button on the remote control. A melody will
sound and cleaning will begin.
Press the Stop/OK button during the cleaning cycle to stop
cleaning.
※
The Robot Cleaner cannot be turned on from Standby, by using
the remote controller when the power of the Robot Cleaner is
the upper side of Robot Cleaner to turn the power on and to
allow the remote to be used.
※
During cleaning, collisions can happen when the sensor cannot detect objects because of their
shape (Thin chairs and table legs, furniture corner). When this happens, the internal impact
detecting sensor will react by using a backward motion.
※
If the Robot Cleaner is set to start cleaning at a location away from the home station, put the Robot
Cleaner on a flat floor in order to prevent a malfunction of the obstacle detecting sensor. In addition,
start cleaning from a location where there are no obstacles . For example, curtains or walls must be
Using the buttons on the Robot Cleaner
Using the remote controller
Loading ...
Loading ...
Loading ...