Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/8194958-combo/bga.png)
myPOS Smart Technical Specicaon & Warranty (Updated March 2018) | page 9
myPOS Combo - User Manual | page 9
Processing magnetic stripe cards
If your customer’s card has only a mag stripe on it, please follow the procedure
below aer you enter and conrm the amount of the transacon. Magnec stripe
cards are swiped with the magnec stripe side facing down using the reader located
at the right side of the myPOS Combo. Make sure the card is inserted properly and
the boom of the card runs rmly along the boom of the card swipe and that the
card is swiped at an even speed. The speed of swiping the card must not be too slow,
as this can somemes cause problems when the terminal is reading cards.
If a CHIP card is swiped as a magnec one, the terminal will display the following
screen.
Please, insert the card with the CHIP facing up into the reader located at the boom
of the myPOS Combo and follow the steps for accepng CHIP cards laid out in the
previous secon. Complete the transacon as described in Step 3 of the previous
secon.
Processing contactless cards (PayPass or
payWave)
The contactless (NFC) technology is gaining popularity and it is very likely that many
of your customers will hand you such cards. Your myPOS Combo device can accept
two types of contactless cards - PayPass and payWave, issued by Mastercard and
VISA respecvely.
Contactless cards always need to have one of the following logos printed on it.
If your customer has a PayPass or payWave logo on it, please follow the procedure
below aer you enter and conrm the amount of the transacon.
Hold the card (or smartphone) approx. 3cm above the display of your myPOS Combo.
When the secure contactless reader recognizes the card, the four colour indicators
will ash indicang that the card is being processed. If the card is successfully read,
all four indicators will be on. The process takes one second and aer you hear a
beep, you can remove the card.
If the card requires a PIN code to be entered, please hand the terminal to the
customer and ask him or her to enter his or her PIN code.
Complete the transacon as described in Step 3 of the previous secon.
Loading ...
Loading ...
Loading ...