Loading ...
Loading ...
Loading ...
Starting the Engine
CRF1000A/A II
Start your engine using the following procedure,
regardless of whether the engine is cold or warm.
NOTICE
•
If the engine does not start within 5 seconds, turn the
ignition switch to the OFF position and wait 10 seconds
before trying to start the engine again to recover
battery voltage.
•
Extended fast idling and revving the engine can
damage the engine, and the exhaust system.
•
Snapping the throttle or fast idling for more than about
5 minutes may cause exhaust pipe discoloration.
•
The engine will not start if the throttle is fully open.
a
Make sure the engine stop switch is in the
(Run) position.
b
Turn the ignition switch to the ON position.
c
Shift the transmission to Neutral (
N
indicator comes on). Alternatively, pull in the
clutch lever to start your motorcycle with the
transmission in gear so long as the side
stand is raised.
d
Press the
START
button with the throttle
completely closed.
If the engine does not start:
a
Open the throttle fully and press the
START
button for 5 seconds.
b
Repeat the normal starting procedure.
c
If the engine starts, open the throttle slightly
if idling is unstable.
d
If the engine does not start, wait 10 seconds
before trying steps a & b again.
#
If Engine Will Not Start (P.149
)
20180214145204_31MKK6000_enu_BOOK Page 73 Wednesday, February 14 2018 15:06:38 JST
Operation Guide
70
Loading ...
Loading ...
Loading ...