Loading ...
Loading ...
Loading ...
ZENMUSE X5R
User Manual
©
2016 DJI. All Rights Reserved.
9
To remove the camera lens, power off the battery and then:
1. While holding down the Lens Release Button, rotate the Lens Lock clockwise to unlock it.
2. While holding down the Lens Release Button, rotate the camera lens counterclockwise to
detach it.
It is recommended to wrap a dust cover around the lens to prevent contamination.
DJI produces dedicated dust covers for the DJI MFT 15mm f/1.7 ASPH and the
Panasonic Lumix G Leica DG Summilux 15mm f/1.7 ASPH. Other lenses may require
you to purchase a third-party dust cover.
It is important to tighten the Lens Lock after attaching the camera lens, as this can
reduce the vibrations of the lens when the aircraft is moving in ight. Always loosen
the Lens Lock before attaching and detaching the camera lens.
A lter can be installed in place of the Camera Balancing Ring. Remember to use a
lter that fullls the weight requirement.
Some lenses must not be used with a lens hood. Be sure to check the table above
for the accessory requirements for your lens.
Be sure to set the lens to AF mode.
Always hold down the Lens Release Button before rotating the Lens Lock to unlock it.
Always hold down the X5R SSD Release Button before removing the X5R SSD.
Lens Release Button
B
A
8. Insert the Micro SD card and the X5R SSD.
8
9
Loading ...
Loading ...
Loading ...