Loading ...
Loading ...
Loading ...
(338,1)
北米Model "A8240BE-E" EDITED: 2019/ 2/ 18
applied after the ignition switch is
turned OFF.
This is a normal operating sound under
any of these conditions.
. The Auto Start Stop system is deac-
tivated while the electronic parking
brake is applied.
. If you operate the electronic parking
brake switch while the Auto Start Stop
system is activated, the Auto Start Stop
system will be deactivated. The elec-
tronic parking brake will activate after
the engine is restarted. After the elec-
tronic parking brake indicator light is
illuminated, release your foot from the
brake pedal.
. When starting the engine or restart-
ing the engine using the Auto Start Stop
system, if you operate the electronic
parking brake switch, the electronic
parking brake indicator light may flash
temporarily. However, this is not a
malfunction if the light turns off after
the electronic parking brake is deacti-
vated.
! Automatic release function by ac-
celerator pedal
S07AP0301
The parking brake will be automatically
released by depressing the accelerator
pedal. However, the automatic release
function does not operate under the
following conditions.
. Any door (other than the trunk lid) is
open.
. The driver’s seatbelt is not fastened.
If the parking brake is automatically
released, the electronic parking brake
indicator light and the indicator light on
the parking brake switch turn off.
! Auto Vehicle Hold function
S07AP0305
The Auto Vehicle Hold function will auto-
matically keep the vehicle stopped even
after releasing the brake pedal when the
vehicle is at a complete stop, such as at
traffic signals. The function will be can-
celed by either of the following operations.
. Depressing the accelerator pedal
. Depressing the brake pedal again
WARNING
. Do not use the Auto Vehicle Hold
function on a steep hill or slip-
pery road. The vehicle may move
even when using the Auto Vehicle
Hold function, causing serious
injury or accidents.
. Do not use the Auto Vehicle Hold
function to park the vehicle. The
vehicle may move unexpectedly,
causing serious injury or acci-
dents. Make sure to shift the
select lever to the “P” position
and apply the electronic parking
brake in the following cases.
– When you are going to park
your vehicle.
– When passengers are getting
in or out of the vehicle.
– When you are loading or un-
loading.
. When using the Auto Vehicle
Hold function, do not release the
brake pedal before the Auto Ve-
hicle Hold operation indicator
illuminates. The vehicle may
move unexpectedly, causing ser-
ious injury or accidents.
. Deactivate the Auto Vehicle Hold
function in the following cases.
Otherwise, the vehicle may move
unexpectedly, causing serious
injury or accidents.
– When washing your vehicle in
an automatic car wash
– When being towed
CAUTION
. When stopping on a steep slope
with the Auto Vehicle Hold func-
tion turned on, the electronic
Parking your vehicle
336
Loading ...
Loading ...
Loading ...