Loading ...
Loading ...
Loading ...
45
LC-40LB480U Full HD LED 1080p TV
Changing channel
settings
Automatically scanning for channels
When you scan for channels, your TV searches for channels
with signals and stores the channel information in the channel
list. When you press CH or CH , your TV goes to the next
or previous channel in the channel list.
If the TV signal source changes, for example you change from
an outdoor antenna to cable TV (no box), you need to scan for
channels.
1 Press MENU.
2 Press
W
or
X
to highlight
Channels, then press ENTER.
3 Press
S
or
T
to highlight Auto Channel Search, then press
ENTER.
4 Press
S
or
T
to highlight Cable/Satellite Box, Cable from
the wall, or Antenna, then press ENTER.
A If you select Cable/Satellite Box, a screen opens to
show the ways you can connect a cable or satellite
box.
Press ENTER. A message tells you that setup is
complete. Press ENTER to close the menu.
B If you select Cable from the wall or Antenna, your
TV scans for channels. The scan may take several
minutes. When a message tells you that setup is
complete, press ENTER to close the menu.
Note
You can press EXIT to stop the auto
channel search, but you will need to run
the auto channel search again to create a
channel list.
Loading ...
Loading ...
Loading ...