Loading ...
Loading ...
Loading ...
6
LIST OF MATERIALS
Removing the packaging.
I CAUTION
Remove carton carefully, wear gloves to protect against sharp edges.
I WARNING
Remove the protective film covering the product before putting into operation.
Supplied Part Pieces Supplied Part Pieces
Hood assembly and
LED lamps already installed
1
Round Transition 10”
(25.4cm)
1
5.4x75 mm screws
14
Horizontal Support
1
6.4x18 mm flat washers
4
10x60 mm wall anchors (concrete)
14
Square nuts
9
6x16 mm screws
9
4.2x19 mm screws
4
Parts no supplied
Tools/Materials required
• Level
• Drill with 1
1
⁄4” (3.0 cm),
1
⁄8” (3.0 mm),
1
⁄16” (4.8 mm) drill bits
• Pencil
• Wire stripper or utility knife
• Tape measure or ruler
• Pliers
• Caulking gun and weatherproof caulking compound
• Vent clamps
• Saber or keyhole saw
• Metal snips
• Covered Liquid tight Flexible Metal Conduit
• Screwdrivers:
- Phillips
- Flat-blade
Parts needed
• Home power supply cable
• 1 - ½” (12.7 mm) UL listed or CSA approved strain relief
• 3 UL listed wire connectors
• 1 wall or roof cap
• Metal vent system
Optional accessories and consumable parts
KIT # Part
36” (91.2 cm) 48” (121.7 cm)
1200 CFM'S Internal
Blower Kit
KIT0156655
1200 CFM'S External
Blower Kit*
KIT0153054
3" Depth Spacer Kit* KIT0153304 KIT0153305
6" Duct Cover Kit KIT0156637 KIT0156641
12" Duct Cover Kit KIT0156645 KIT0156649
*Accessories exclusively sold in the US and Canada
Loading ...
Loading ...
Loading ...