Loading ...
Loading ...
Loading ...
121
Convenient operations by programming a
series of actions (macro) for a key/button
3
Press the [OK] key to program the key/button of
the selected component.
Operation for turning on the amplifier is temporarily stored.
Repeat steps 1 - 3 until you finish programming the macro procedure.
For example, press the following keys to set remote control operations to
watch a DVD.
z Tip
Make sure to press the [OK] key after pressing a function key/button to be
programmed as a macro procedure. An operation step is stored by pressing the
[OK] key.
To change a component also, press the [OK] key.
Note
A macro procedure already programmed for a key/button is set as one step.
4
Press the [OK] key.
The macro is programmed here.
The display returns to the Component
display where you selected a key/button
you wanted to program a macro for.
Programming of the macro is complete.
z Tip
If you press the [CANCEL] key here, all procedures above are canceled.
5
To finish all settings, press the COMMANDER OFF
button for 2 seconds or longer.
The display returns to the Home display. Or press the [EXIT] key
repeatedly until the Home display is shown.
z Tips
• If you want to set the macro programmed for a Component key as a step of a macro,
press the Component key for 2 seconds or longer in step 1. When programming is
complete, a short beep sounds.
• If you want to set the macro programmed for a Direct Access button as a step of a
macro, press the Direct Access button in step 1.
DVD
DVD
TV
TV
RCVR
TV POWER
DVD
POWER
VIDE01
DVD
OK
OK
OK
OK
OK
Continued
Loading ...
Loading ...
Loading ...