Loading ...
Loading ...
Loading ...
Problem solving guide
41
Problem Possible cause and remedy
After the SmartLine
appliance has been
switched on or a sensor
control has been
touched, appears in
the timer display for a
few seconds.
The system lock or safety lock is activated.
Deactivate the system lock or safety lock (see
“Safety features - System lock / Safety lock”).
The SmartLine
appliance has switched
off automatically. When
the appliance is
switched back on,
appears above the On/
Off sensor control.
One or more of the sensor controls are covered, e.g.
by finger contact, food boiling over, or an object.
Clean off any dirt and/or remove the object (see
“Safety features – Safety switch-off”).
After the SmartLine
appliance has been
switched on, appears
briefly in the timer
display. The SmartLine
appliance does not heat
up.
The SmartLine appliance is in demonstration mode.
Touch the0 and 2 sensor controls at the same
time until flashes alternately with in the
timer display.
The wok has switched
itself off automatically.
It has been operated for too long.
Switch the wok back on (see “Safety features –
Safety switch off”).
The overheating protection mechanism has been
activated.
See “Safety features - Overheating protection”.
The Booster has
automatically switched
off early.
The overheating protection mechanism has been
activated.
See “Safety features - Overheating protection”.
A cooking zone is not
working in the usual
way on the power level
selected.
The overheating protection mechanism has been
activated.
See “Safety features - Overheating protection”.
An operating noise can
be heard after the
SmartLine appliance
has been switched off.
The cooling fan runs until the SmartLine appliance
has cooled down and then switches off
automatically.
Loading ...
Loading ...
Loading ...