Loading ...
Loading ...
Loading ...
Operation
23
Risk of fire due to overheated
food.
Unattended food can overheat and
ignite.
Do not leave the SmartLine
appliance unattended whilst it is
being used.
Please note that the heating-up time
is very short with induction heating.
Switching on the wok
Touch the sensor.
Further sensor controls will light up.
If no further entry is made, the wok will
switch itself off after a few seconds for
safety reasons.
Setting the power level
Permanent pan recognition is
activated as standard (see
“Programming”). When the wok is
switched on and you place a wok pan
on it, all the sensor controls for the
numerical keybank will light up.
Place the wok pan in position.
Touch the appropriate number sensor
control for the power level you want.
Switching off
To switch off the wok basin, touch
the0 sensor control on the numerical
keybank.
To switch off the wok, touch the
sensor control.
Residual heat indicator
If the SmartLine appliance is still hot,
the residual heat indicator will light up
after it has been switched off.
Depending on the temperature, a dot
will appear above power levels 1, 2 and
3.
The dots of the residual heat indicator
go out one after the other as the
SmartLine appliance cools down. The
last dot only goes out when the
SmartLine appliance is safe to touch.
Risk of burning due to hot
surfaces.
The surfaces will be hot after use.
Do not touch the surfaces while the
residual heat indicators are on.
Setting the power level -
extended power level range
Touch the numerical keybank in
between two number sensors.
The sensors in front of and after the
interim level will light up brighter than
the other sensors.
Example:
If you have set power level 7., the
numbers 7 and 8 will be brighter than
the other numbers.
Loading ...
Loading ...
Loading ...