Loading ...
Loading ...
Loading ...
SAFETY PRACTICES AND PRECAUTIONS
CAUTION! – For general ventilation use only. DO NOT use to exhaust hazardous
or explosive materials or vapors.
CAUTION! – To reduce the risk of fire and to properly exhaust air, be sure to duct
air to outside. Do not vent exhaust air into spaces within walls or ceiling, nor into
attics, crawl spaces or garages.
WARNING! – To reduce the risk of fire, use only metal ductwork.
Install this hood in accordance with all requirements specified.
WARNING! – To reduce the risk of fire or electrical shock, do not use this hood with
any external solid-state speed control device.
This Vent Hood system is designed to remove smoke, cooking vapors and odors from the
cook top area.
WARNING! – All wall and floor openings where the vent hood is installed must be
sealed.
Consult the cook top or range installation instructions given by the manufacturer before
making any cutouts. MOBILE HOME INSTALLATION: the installation of this Hood
must conform to the Manufactured Home Construction and Safety Standards, Title 24
CFR, Part 3280 (Formerly Federal Standard for Mobile Home Construction and Safety,
Title 24, HUD, part 280). Three wire power supplies must be used and the appliance
wiring must be revised. See electrical requirements on page 1.
DO NOT use 4” laundry –type wall caps
Flexible-type ductwork is not recommended
DO NOT obstruct the flow of combustion and ventilation air. Be sure a fresh air
supply is available.
Failure to follow venting requirements may result in a fire.
Electrical ground is required on this hood.
If cold water pipe is interrupted by plastic, non-metallic gaskets or other
materials, DO NOT use for grounding.
DO NOT ground to gas pipe.
DO NOT have a fuse in the neutral or grounding circuit. A fuse in the neutral or
grounding circuit could result in electrical shock.
Check with a qualified electrician if you are in doubt as to whether the Hood is
properly grounded.
Failure to follow electrical requirements may result in a fire.
Be sure all the range and/or cook top controls are turned off and the appliance is
cool before using any type of aerosol cleaner on or around the appliance. The
chemical that produces the spraying action could, in the presence of heat, ignite or
cause metal parts to corrode.
5
Loading ...
Loading ...
Loading ...