Loading ...
Loading ...
Loading ...
39
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSES WHAT TO DO
DishDrawer™
Dishwasher will
not start
Power supply is
not connected.
Connect the power supply.
The drawer is not
closed properly.
Ensure the drawer is firmly closed.
KEYLOCK or CHILDLOCK
feature is on.
Turn KEYLOCK or CHILDLOCK off. See your
Quickstart guide for instructions.
Cycle not started.
Press
.
Too much time passed
between pressing
and
closing the drawer.
Open the drawer and press
then close the
drawer within 4 seconds.
DishDrawer™
Dishwasher is in
Demo mode.
Contact Customer Care.
Fan noise after
a wash program
has finished
This is normal. The fan
continues to run to
assist with drying.
The fan will automatically stop after a set time,
or when the drawer is opened. The fan may
resume when the drawer is closed again.
Fan noise starts
when I close
the drawer,
even though I
didn’t start a
new wash
This is normal. In some
cases, the fan will
run when the drawer
is closed for a set
time after a program
has finished.
No action required. The fan will automatically
stop after the set time is over.
No powdered
detergent
dispensed
Detergent dispenser
was wet when loaded.
Clean the dispenser and ensure it is dry before
adding detergent. Refer to 'Detergent'.
The wash
seems to have
finished, but
the drawer will
not open
The wash program
is still in progress. It
is in a quiet phase
that is needed for
optimal performance.
No action required. The program will transition
into a more audible phase after the quiet
phase is over.
Water pooling
on inner rim of
drawer after
a wash
This is normal
condensation.
Wipe dry.
Water under
the filter
This is normal. No action required.
Excess water in
the drawer
Drain hose(s) bent. Straighten the drain hose(s).
Blocked filters. Refer to 'Maintenance'.
Loading ...
Loading ...
Loading ...