Loading ...
Loading ...
Loading ...
38
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSES WHAT TO DO
Foaming Incorrect detergent use. Refer to 'Detergent'.
Egg left on plates. Rinse excess egg prior to loading.
Rinse aid setting
too high.
Decrease the rinse aid setting.
Rinse aid dispenser plug
not closed properly.
Ensure the plug is closed tight with the hand
grip in a vertical position. Refer to 'Rinse aid'.
Water leaking Drain hose
disconnected from
waste pipe.
Reconnect the drain hose to the waste pipe.
Water inlet hose not
connected correctly.
Ensure the inlet hose is connected securely.
Other leaks. Turn water and power supplies to the
DishDrawer™ Dishwasher off. Call Customer
Care or your Authorised Service Centre.
Rinse aid dispenser plug
not closed properly.
Ensure the plug is closed tight with the hand
grip in a vertical position. Refer to 'Rinse aid'.
Knocking
on the door
doesn't pause
the wash cycle
Knock to Pause sensor
is incorrectly installed or
calibrated.
Contact Customer Care.
DishDrawer™
Dishwasher™
Dishwasher
is pausing
inadvertently
Knock to Pause sensor
is recognising taps and
bumps as knocks.
Contact Customer Care.
Drawer will not
open (no tones
or wash in
progress)
CHILDLOCK is on. Turn CHILDLOCK off. Refer to
'Keylock & Childlock'.
Closed drawer auto lock
is on.
Knock once on the door and open drawer
within 30 seconds.
Power failure
during wash
program
Power outage in your
home or area.
Wait until power resumes, program will restart
in same part of wash program.
Flashing wash
modifier
indicators
A fault has occurred. Refer to 'Fault codes'.
Intermittent
beeping
DishDrawer™
Dishwasher is paused.
Open the drawer and press
then close the
drawer to resume the program.
Loading ...
Loading ...
Loading ...