Loading ...
Loading ...
Loading ...
10En
• If
there is no device available, [NOT FOUND] appears in the display.
5 Turn the M.C. dial to select a device from the device list, then press to
confirm.
Press and hold the M.
C. dial to switch the displayed device information
between the Bluetooth device address and device name.
If you make a Bluetooth connection from the unit, proceed to step 7.
6 Select [Pioneer BT Unit] shown in the device display.
7 Make sure the same 6-digit number appears on this unit and the device,
then select “Yes” on the device.
NOTES
• [DEVICE FULL] appears if the unit has already been paired with ten other devices. In this
case, delete one of the paired devices. See [DEL DEVICE] in the Bluetooth settings
(page 10).
• Depending on the device, the PIN code is required in step 7. In this case, input [0000].
TIP
The Bluetooth connection can be also made by detecting the unit from the Bluetooth
device. To do so, [VISIBLE] in the Bluetooth settings needs to be set to [ON]. For details on
Bluetooth device operations, refer to the operating instructions supplied with the
Bluetooth device.
Bluetooth settings
Menu Item Description
DEVICELIST Display the list of paired Bluetooth devices. “*” appears
o
n the device name when the Bluetooth connection is
established.
When no device is selected in the device list, this
f
unction is not available.
DEL DEVICE Delete the device information.
[DELETE YES],
[D
ELETE NO]
ADD DEVICE Register a new device.
If ten devices are already paired, this function is not
a
vailable. You can check the number of paired devices on
the [DEVICELIST] setting.
A.CONN Select [ON] to connect to a Bluetooth device
a
utomatically.
[ON], [OFF]
VISIBLE Select [ON] so that a Bluetooth device can detect the
unit
when the unit is connected via Bluetooth to another
device.
[ON], [OFF]
PIN CODE Change the PIN code.
1 P
ress the M.C. dial to display the setting mode.
2 Tu
rn the M.C. dial to select a number.
3 P
ress the M.C. dial to move the cursor to the next
position.
4 Af
ter inputting the PIN code, press and hold the M.C.
dial.
After inputting the PIN code, pressing the M.
C. dial
returns you to the PIN code input display, and you can
change the PIN code.
DEV. INFO Switch the device information on the display between
the device name and Bluetooth device address.
Menu Item Description
Loading ...
Loading ...
Loading ...