Loading ...
Loading ...
Loading ...
27
Reset: Returns to the factory settings.
Preset: The optimized data has been preset.
Depending on the adjustments made above, colors may become uneven or the resolution may change.
Flange Back Correction Adjust the focus by pressing the M/,/ m/< buttons.
Tips
• This function is different from the lens focus.
• Normally, there is no need to adjust according to the installation environment. Use this item for
installation in a special environment.
Network Setting Perform Internet protocol settings.
IPv4 Setting IP Address Setup: Selects the IP address setting method.
Auto(DHCP): The IP address is assigned automatically from the DHCP server such as a router.
Manual: Specifies the IP address manually.
When “Manual” is selected for “IP Address Setup,” input “IP Address,” “Subnet Mask,” and “Default
Gateway.” Select each item with the
M/m buttons, then press the button. Select the frame to input with
the
</, buttons and input the value with the M/m buttons. When all items are entered, select “Apply,”
and then press the button. The entered settings will be registered.
IP Address: Sets the unit’s IP address.
Subnet Mask: Sets the unit’s subnet mask.
Default Gateway: Sets the unit’s default gateway.
MAC Address: Displays the unit’s MAC address. This cannot be changed.
Apply: Enables the IP address that is set manually.
IPv6 Information Displays the IPv6 information.
When you set the IPv6 IP address, set it on a Web browser (page 29).
Setting items Description
Note
Loading ...
Loading ...
Loading ...