Loading ...
Loading ...
Loading ...
Before using for the first time
19
Connecting via WPS
Your Wi-Fi router must support WPS
(Wi-Fi Protected Setup).
Switch the drawer off.
Press and hold the sensor.
At the same time, touch the
sensor.
2h will light up constantly, 3h will flash
on and off.
The WPS connection must be started
on the drawer at the same time as on
the Wi-Fi router.
Touch the sensor control on the
drawer after a few seconds.
After a short while, 2h will light up
constantly, and 3h and 4h will flash on
and off.
The drawer will be ready for connection
in the next 10minutes.
Start the WPS connection on your
Wi-Fi router.
When successfully connected, 2h and
3h will light up constantly.
Quit the connection mode on the
drawer by touching the sensor.
The drawer can now be operated via
the App.
If the connection fails, you have
probably not connected WPS on your
router quickly enough. Repeat the steps
above.
Useful tip: If your Wi-Fi router does not
support WPS, please connect via the
Miele@mobile App.
Signing out of Wi-Fi (resetting factory
default settings)
To set up a new Wi-Fi connection, the
existing Wi-Fi connection must first be
disconnected.
Switch the drawer off.
Press and hold the sensor.
At the same time, touch the
sensor.
With an existing Wi-Fi connection, 2h
and 3h will light up constantly.
The drawer will be ready for
disconnection in the next 10minutes.
Touch the sensor.
2h will light up constantly, 3h will flash
on and off.
After a few seconds, 2h and 3h will
flash on and off. The connection has
been disconnected.
Quit the signing-off mode on the
drawer by touching the sensor.
The Wi-Fi connection has been
disconnected. A new connection can
now be set up.
Loading ...
Loading ...
Loading ...