User Manual Netgear JGS516PE-100NAS Networking

Documents for Netgear JGS516PE-100NAS

User Manual

For JGS516PE-100NAS. Also, The document are for others Netgear models: GS105EV2, GS105PE, GS108EV3, GS108PEV3, GS116EV2, JGS516PE, JGS524EV2, JGS524PE

• ProSAFE® Gigabit Web Managed (Plus) Switches1
• Contents3
• 1. Get Started6
  • Supported Switches7
  • Configure the Switch7
  • Access the Switch Using a Web Browser7
    • Access a Switch That Is Off-Network8
    • Access a Switch That Is Connected to a Network8
  • Access the Switch With the ProSAFE Plus Configuration Utility9
    • Install the ProSAFE Plus Utility9
    • Access and Configure the Switch Using the ProSAFE Plus Utility9
  • Change the Password10
    • Use Browser-Based Access to Change the Password11
    • Use the ProSAFE Plus Utility to Change the Password11
• 2. Manage Network Settings13
  • Specify IP Address Settings for the Switch14
    • Use Browser-Based Access to Specify the Switch IP Address14
    • Use the ProSAFE Plus Utility to Specify the Switch IP Address15
  • Manage Multicast Traffic With IGMP Snooping16
    • Use Browser-Based Access to Customize IGMP Snooping16
    • Use the ProSAFE Plus Utility to Customize IGMP Snooping17
    • Use Browser-Based Access to Specify a VLAN for IGMP Snooping19
    • Use the ProSAFE Plus Utility to Specify a VLAN for IGMP Snooping20
  • Set Up Static Link Aggregation Groups21
    • Use Browser-Based Access to Specify LAG Membership and Enable LAGs21
    • Use the ProSAFE Plus Utility Specify LAG Membership and Enable LAGs23
• 3. Optimize Performance With Quality of Service25
  • Enable 802.1p/DSCP-Based Quality of Service26
    • Use Browser-Based Access to Enable 802.1p/DSCP-Based QoS26
    • Use the ProSAFE Plus Utility to Enable 802.1p/DSCP-Based QoS27
  • Configure Port-Based Quality of Service27
    • Use Browser-Based Access to Configure Port-Based QoS28
    • Use the ProSAFE Plus Utility to Configure Port-Based QoS29
  • Set Up Rate Limiting30
    • Use Browser-Based Access to Set Up Rate Limiting31
    • Use the ProSAFE Plus Utility to Set Up Rate Limiting32
  • Set Up Broadcast Filtering33
    • Use Browser-Based Access to Set Up Broadcast Filtering33
    • Use the ProSAFE Plus Utility to Set Up Broadcast Filtering34
• 4. Use VLANS for Traffic Segmentation36
  • VLAN Overview37
  • Create Basic Port-Based VLANs37
    • Use Browser-Based Access to Create Basic Port-Based VLANs37
    • Use the ProSAFE Plus Utility to Create Basic Port-Based VLANs38
  • Assign Ports to Multiple Port-Based VLANs40
    • Use Browser-Based Access to Assign Ports to Multiple Port-Based VLANs40
    • Use the ProSAFE Plus Utility to Assign Ports to Multiple Port-Based VLANs41
  • Create 802.1Q-Based VLANs in a Basic Configuration43
    • Use Browser-Based Access to Create 802.1Q-Based VLANs in a Basic Configuration43
    • Use the ProSAFE Plus Utility to Create 802.1Q-Based VLANs in a Basic Configuration44
  • Create 802.1Q-Based VLANs in an Advanced Configuration46
    • Use Browser-Based Access to Create 802.1Q-Based VLANs in an Advanced Configuration46
    • Use the ProSAFE Plus Utility to Create 802.1Q-Based VLANs in an Advanced Configuration47
  • Add Tagged or Untagged Ports to an 802.1Q-Based VLAN49
    • Use Browser-Based Access to Add Tagged or Untagged Ports to an 802.1Q-Based VLAN49
    • Use the ProSAFE Plus Utility to Add Tagged or Untagged Ports to an 802.1Q-Based VLAN50
  • Specify a Port PVID for an 802.1Q-Based VLAN51
    • Use Browser-Based Access to Assign a PVID to Ports52
    • Use the ProSAFE Plus Utility to Assign a PVID to Ports53
• 5. Manage and Monitor the Switch54
  • Manage Flow Control55
    • Use Browser-Based Access to Manage Flow Control55
    • Use the ProSAFE Plus Utility to Manage Flow Control56
  • Manage the Port Speed57
    • Use Browser-Based Access to Specify the Port Speed or Shut Down a Port57
    • Use the ProSAFE Plus Utility to Specify the Port Speed or Shut Down a Port58
  • Enable Loop Detection59
    • Use Browser-Based Access to Enable Loop Detection59
    • Use the ProSAFE Plus Utility to Enable Loop Detection60
  • Manage Power Saving Options61
    • Use Browser-Based Access to Enable Power Saving Mode61
    • Use the ProSAFE Plus Utility to Enable Power Saving Mode62
  • Upgrade the Firmware63
    • Use Browser-Based Access to Upgrade the Firmware63
    • Use the ProSAFE Plus Utility to Upgrade the Firmware64
  • Reboot the Switch65
    • Use Browser-Based Access to Reboot the Switch65
    • Use the ProSAFE Plus Utility to Reboot the Switch66
  • Save the Switch Configuration67
    • Use Browser-Based Access to Save the Switch Configuration67
    • Use the ProSAFE Plus Utility to Save the Switch Configuration67
  • Restore a Saved Switch Configuration68
    • Use Browser-Based Access to Restore a Saved Switch Configuration68
    • Use the ProSAFE Plus Utility to Restore a Saved Switch Configuration69
  • Restore Factory Default Settings69
    • Use Browser-Based Access to Restore Factory Settings69
    • Use the ProSAFE Plus Utility to Restore Factory Settings70
  • Enable Port Mirroring71
    • Use Browser-Based Access to Enable Port Mirroring71
    • Use the ProSAFE Plus Utility to Enable Port Mirroring72
  • View Switch Information73
    • Use Browser-Based Access to View Switch Information73
    • Use the ProSAFE Plus Utility to View Switch Information74
  • View the Port Statistics75
    • Use Browser-Based Access to View and Clear the Port Statistics75
    • Use the ProSAFE Plus Utility to View and Clear the Port Statistics76
• 6. Diagnostics and Troubleshooting77
  • Use Browser-Based Access to Register Your Product78
  • Test Cable Connections78
    • Use Browser-Based Access to Test a Cable Connection79
    • Use the ProSAFE Plus Utility to Test a Cable Connection79
  • Resolve a Subnet Conflict to Access the Switch80
• A. Factory Default Settings82