User Manual Kalamera KRC-90BV 2.8 Cu.ft 15” Built-in 96 Can Beverage Cooler

• Owner's manual - (English)

Table of contents

• Your Beverage Refrigerator
• Technical Data
• Safety Precautions
• Important Precautions
• Installation Instructions
• Operating Your Beverage Refrigerator
• Care And Maintenance
• Trouble Shootings

User manual Beverage Cooler

Your Beverage Refrigerator

KRC-120BV

KRC-90BV

KRC-150BV

Technical Data

Electrical Circuit Diagram

KRC-120BV

Electrical Circuit Diagram

KRC-90BV & KRC-150BV

Safety Precautions

• PLEASE READ all instructions before installing, operating, or servicing the appliance.
• Danger and Warning: Failure to follow this safety statement will result in severe personal injury or death, property or equipment damage.
• RISK OF CHILD ENTRAPMENT. Before you throw away your old refrigerator or freezer, take off the doors and leave shelves in place so children may not easily climb inside. Keep children away from the wine cooler, avoid them put fingers in air outlet on the kick plate.

SHOCK HAZARD - Electrical Grounding required.

• Never attempt to repair or perform maintenance on the unit until the electricity has been disconnected.
• Never remove the round grounding prong from the plug and never use a two-prong grounding adaptor.
• Altering, cutting of power cord, removal of power cord, removal of power plug, or direct wiring can cause serious injury, fire or loss of property and life, and will void the warranty.
• Never use an extension cord to connect power to the unit.
• Always keep the working area dry.

Important Precautions

• Do not lift unit by door handle.
• Do keep the door closed before installing into cabinet.
• Be sure the kick-plate on the front bottom is free from obstruction. Obstructing free airflow can cause the unit to malfunction and will void the warranty.
• Allow unit temperature to stabilize for 24 hours before use.
• Do not block any internal fans.
• Use only genuine supplier's replacement parts. Imitation parts can damage the unit, affect its operation or performance and may void the warranty.

Installation Instructions

Before using your beverage refrigerator:

• Remove the exterior and interior packing.
• Clean the interior surface with lukewarm water using a soft cloth.
• Place your appliance on a floor that is strong enough to support the appliance when it is fully loaded.
• To level your appliance, adjust the front legs at the bottom of the appliance.
• Before connecting the appliance to the power outlet, let it stand upright for approximately 24 hours. This will reduce the possibility of malfunction in the cooling system from handling during transportation.
• Choose a cool, shady location, out of direct sunlight, to prevent ambient temperature fluctuations of your beverage refrigerator.
• After 24 hours, plug in beverage refrigerator, and allow interior to adjust to optimal temperature before adding any bottles.
• After 24 additional hours, fill with bottles. Allow beverage refrigerator to adjust to reach your set temperature.
• For optimal function, do not obstruct interior fan or exterior kick plate.
• To install the door handle: For shipment, the door handle has been stored inside of the unit binding to the wood shelves. To install the handle, the door gasket should be gently pulled back where it covers the screw holes for the handle, then the handle should be attached by screwing into place with the two screws which are packed in the box with this Instruction Manual and other spare parts.

• To reverse the door swing(ONLY FOR KRC-90BV & KRC-150BV):

KRC-120BV is not available to swing the door.

As you received your beverage refrigerator, the door swings open at the left. If you wish to reverse the swing so that the door opens from the right, it is most important to have at least one other person to help. Itisverydangerous to try to reverse the door swing by yourself, without anybody’s help the door might fall and the glass might be broken, which is terribly dangerous

Now, unscrew the upper door hinge while the second person hold the door. Remove the upper hinge and carefully lift the door off the bottom hinge. Unscrew the bottom hinge and install it on the left side of the unit. Flip the door around so that the handle is on the right side and slip the door over the bottom hinge. Reattach the door by screwing the top hinge into the holes provided on the upper left surface of the unit. Make adjustments as necessary to be sure the door is aligned properly

• Suggest cabinet dimension:

• KRC-120BV is a free standing beverage refrigerator, install it in a cabinet will obstruct free airflow, can cause the unit to malfunction and will void the warranty. PLEASE KEEP IT FREE STANDING!
• Spare parts details:

KRC-90BV & KRC-150BV

Operating Your Beverage Refrigerator

The Control Panel:

How to use the press-buttons on the Display Panel:

• To control the temperature, press UP or DOWN button. To control the temperature, press UPandDOWNbutton.Each press would adjust the temperature by 1°C between 3~10°C or 1°F between 38~50°F.
• To turn on or off the internal LED lighting, press LIGHT button on the right side.
• To switch the temperature display from Celsius Degree to be Fahrenheit Degree or vice versa, press C/Fbutton.

Care And Maintenance

Cleaning your beverage refrigerator

• Unplug the beverage refrigerator and remove the bottles.
• Wash the inside with warm water or baking soda solution. The solution should be about 2 tablespoons of baking soda to a quart of water.
• The outside of beverage refrigerator should be cleaned with mild detergent or warm water.
• Draw out the water box at the bottom, and wash it.

Moving your beverage refrigerator

• Remove all the bottles.
• Securely tape down all loose items inside your beverage refrigerator.
• Turn the leveling legs up to the base to avoid damage.
• Tape the door.
• Be sure the beverage refrigerator stays in the upright position during transportation.

Trouble Shootings

You can solve many common beverage refrigerator problems easily, saving you the cost of a possibleservicecall.Try the suggestion below to see if you can solve the problem before calling the service center.