Loading ...
Loading ...
Loading ...
14
CARE AND MAINTENANCE
Cleaning Your Wine Cooler
• Turn off the power, unplug the appliance, and remove all items including shelves and rack.
• Wash the inside surfaces with a warm water and baking soda solution. The solution should
be about 2 tablespoons of baking soda to a quart of water.
• Wash the shelves with a mild detergent solution.
• Wring excess water out of the sponge or cloth when cleaning area of the controls, or any
electrical parts.
• Wash the outside cabinet with warm water and mild liquid detergent. Rinse well and wipe
dry with a clean soft cloth.
How to replace the charcoal filter (if present in your appliance)
• Charcoal filters are located in the top left corner of each wine cabinet zone.
• Open the door and remove the top 2 shelves (see removing the shelves).
• Turn the filter as per Fig A.
• As per Fig B, the filter should line up with the notches as shown.
• Pull the filter out (Fig C).
• Insert replacement filter and twist as per Fig A to lock into position.
• Re-install the shelves.
Power Failure
• Most power failures are corrected within a few hours and should not affect the
temperature of your appliance if you minimize the number of times the door is opened. If
the power is going to be off for a longer period of time, you need to take the proper steps to
protect your contents.
Vacation Time
• Short vacations: Leave the Wine Cooler operating during vacations of less than three weeks.
• Long vacations: If the appliance will not be used for several months, remove all items and turn
off the appliance. Clean and dry the interior thoroughly. To prevent odor and mold growth,
leave the door open slightly: blocking it open if necessary.
Moving Your Wine Cooler
• Remove all items.
• Securely tape down all loose items (shelves) inside your appliance.
• Turn the adjustable leg up to the base to avoid damage.
• Tape the door shut.
• Be sure the appliance stays secure in the upright position during transportation. Also
Loading ...
Loading ...
Loading ...