Nautilus T624 User Manual

Loading ...

The Upper Display shows the current value setting: “ON” or “OFF”. Push the Increase()orDecrease()buttonsto

change the value. The default is “ON”.

Push the OK button to set the Telemetry Heart Rate Receiver to active.

10. The Console will go to the Power-Up Mode screen with the user selected.

Reset a User Profile

1. From the Power-Up Mode screen, push theUserbuttontoselectoneoftheUserProles.

2. Push the OK button to select the User Profile.

3. The Console display shows the EDIT prompt. Push the Decrease ()button to change the prompt.

Note: ToexittheUserProleoptions,pushthePAUSE/STOPbuttonandtheconsolewillgobacktothePower-Up

Mode screen.

4. The Console display shows the RESET prompt and the current User Profile name. Push OK to start the Reset User

Proleoption.

5. TheConsolewillnowconfirmtherequesttoresettheUserprofile(thedefaultselectionis‘RESET-NO’).Pushthe

Increase()orDecrease()buttonstoadjusttheselection.

6. Push OK to make your selection.

7. The Console will go to the Power-Up Mode screen.

Changing Incline Levels

Push the Incline Level Increase()orDecrease()buttonstochangetheinclineangle

of the Deck at any time with the Safety Key installed. To rapidly change the incline level

push the desired Pre-Set Incline Button, and then the Incline Enter Button. The Deck will

adjust to the selected incline level.

Note: After a Pre-Set Incline Button is pushed, the Incline Enter Button must be

pushed within 12 seconds.

Be sure the area below the machine is clear before lowering the Deck. Fully

lower the Deck after each workout.

Exercise on this machine requires coordination and balance. Be sure to

anticipate that changes in belt speed and incline angle of deck can occur

during workouts, and be attentive in order to avoid loss of balance and

possible injury.

Be sure that the workout space you are utilizing has adequate height clearance, taking into consideration the height of the

userandthemaximumheightofthefullyinclinedDeck.

Changing Speed Levels

Push the Speed Level Increase()orDecrease()buttonstochangetheBeltSpeedatanytimeinaworkoutprogram.

To rapidly change the Speed level push the desired Pre-Set Speed Button, and then the Speed Enter Button. The Walking

Belt will adjust to the desired speed.

Note: After a Pre-Set Speed Button is pushed, the Speed Enter Button must be pushed within 12 seconds.

Profile Programs

Theseprogramsfeaturedifferentinclineanglesofthedeckandbeltspeedsbasedonthemaximumandminimumspeed

supplied by the user. The user can also manually adjust the incline and speed values at any time during a workout. The

ProleProgramsareorganizedintoCategories(QuickGoal,HeartHealth,WeightControl,Interval,Train,andCustom).

EachProleProgramhas16segmentsallowingforavarietyofworkouts.

INCLINE SPEED

Pre-Set Incline

Buttons

Incline

Enter

Button

Loading ...

Nautilus T624 Treadmill

User Manual - Page 35