4 After installing, run about two to three gallons of water through your
refrigerator’s water dispenser to remove air and loose carbon pieces. The
water may be cloudy and sputter until the air is removed.
5 We apply a safe, NSF approved, food grade silicone lubricant to our lter
connectors (jelly like substance).
NS-DA2903 or NS-DA2903-2 (Samsung)
1 Remove the old lter by rotating it a quarter turn
counterclockwise, then pull it straight down.
The water automatically turns o.
2 Align the top of your new lter with the receiver,
then push it up until it stops.
3 Rotate the lter a quarter turn clockwise to
secure the lter.
NS-MWF-2 (GE, Hotpoint, Amana, and Kenmore)
1 Remove the old lter by rotating it a half turn
counterclockwise, then pull it straight down. The
water automatically turns o.
2 If you have a Kenmore refrigerator, check if there
is a plastic or metal cap that covers the top of the
old lter. If there is, pull o the cap and attach it to
your new lter. If there is not, continue to step 3.
3 Align the top of your new lter with the receiver,
then push it up until it stops.
4 Rotate the lter a half turn clockwise to secure
the lter, then twist a little more to prevent leaks.
NS-LT600B-2 (LG and Kenmore)
1 Remove the old lter by rotating a half turn
counterclockwise, then pull it out. The water
automatically turns o.
2 If you have a Kenmore refrigerator, check if there is
a plastic or metal cap that covers the top of the old
lter. If there is, pull o the cap and attach it to
your new lter. If there is not, continue to step 3.
3 Align the top of your new lter with the receiver,
then push it in until it stops.
4 Rotate the lter a half turn clockwise to secure the
lter, then twist a little more to prevent leaks.
NS-DA2920 or NS-DA2920-2 (Samsung)
1 Remove the old lter by rotating it a 1/4 turn
counterclockwise, then pull it out.
2 Align the top of your new lter with the receiver,
then push it up until it stops.
3 Rotate the lter a 1/4 turn clockwise to secure the
lter.
Before using your lter
If your refrigerator has a change lter indicator, reset it. See “Resetting your
lter indicator” for instructions.
Quick Setup Guide
Refrigerator Filter
|
NS-MWF-2/NS-LT600B-2/NS-DA2920/NS-DA2920-2/NS-DA2903/NS-DA2903-2
Before using your new product, please read these instructions to prevent any damage.
Congratulations on your purchase of one of the highest
performing water lters on the market today. Insignia lters use
a high-grade coconut carbon that has 50% more micro-pores
than standard carbon. They also use fewer high-compression
binders, giving you the best water ltration possible.
Package contents
• Refrigerator lter(s) (1 or 2 pack)
• Quick Setup Guide
General installation guidelines
1 YOU MUST SOAK your new lter in water for 15 minutes prior to
installing it in your refrigerator. This is needed to remove air from
the carbon block.
2 It is normal for black carbon nes (particles) to appear on the outside
of your lter. This happens when the lter is jarred in shipping, it is
safe, simply wipe it o.
3 Connections on our lters are larger in size to prevent leakage. This
might require more hand leverage to install.
Installation:
*PUSH AND TURN HARD
To remove turn counter-clockwise
To install turn clockwise
Do not remove the O-ring
Filter receivers are designed to be exible.
Don’t worry, they won’t break!
C
M
Y
CM
MY
CY
CMY
K
NS-MWF-2_NS-LT600B-2_NS-DA2920_NS-DA2920-2_NS-DA2903_NS-DA2903-2_14-0651_QSG_V2_EN.ai 1 6/19/2014 11:31:05 AMNS-MWF-2_NS-LT600B-2_NS-DA2920_NS-DA2920-2_NS-DA2903_NS-DA2903-2_14-0651_QSG_V2_EN.ai 1 6/19/2014 11:31:05 AM
Loading ...
