Loading ...
Loading ...
Loading ...
14
1. Unplug refrigerator or disconnect power.
2. Clean the interior.
Hand wash, rinse, and dry removable parts
and interior surfaces thoroughly. Use a clean
sponge or soft cloth and a mild detergent in
warm water.
3. Clean the door and drawer seals (gaskets). A
dirty or sticky seal may adhere to the cabinet
and tear when you open the door.
Using a soft cloth and a solution of mild
detergent and warm water, hand wash the
door seals. Rinse with clear water and dry
thoroughly.
4. Clean the exterior surfaces.
Wash exterior surfaces with a clean, soft cloth
or sponge and a mild detergent in warm water.
Rinse surfaces with clean, warm water and dry
immediately to avoid water spots.
5. Plug in refrigerator or reconnect power.
Lights
IMPORTANT: Your refrigerator is equipped with
LED lighting. These lights are designed to last
for the life of your refrigerator. However, if the
lights stop operating, please contact a qualified
technician for replacement.
Vacation and Moving Care
Vacation
If You Choose to Leave the Refrigerator On While
You’re Away:
1. Use up any perishables and freeze other items.
If You Choose to Turn Off the Refrigerator Before
You Leave:
1. Remove all food from the refrigerator and
freezer.
2. Unplug refrigerator or disconnect power.
3. Clean refrigerator, wipe it, and dry well.
4. Tape rubber or wood blocks to the tops of both
doors to prop them open far enough for air to
get in. This stops odor and mold from building
up.
Moving
WARNING
Do not puncture refrigerant tubing.
Follow handling instructions carefully.
Flammable refrigerant used.
Failure to do so can result in death, explosion
or fire.
IMPORTANT: Handle with care when moving
refrigerator to avoid either damaging the
refrigerant tubing or increasing the risk of a leak.
WARNING
Excessive Weight Hazard
Use two or more people to move and
install refrigerator.
Failure to do so can result in back or other injury.
When you are moving your refrigerator to a new
home, follow these steps to prepare it for the
move.
1. Remove all food from the refrigerator and pack
all frozen food in dry ice.
2. Unplug refrigerator.
3. Clean, wipe, and dry thoroughly.
4. Take out all removable parts, wrap them well,
and tape them together so they don’t shift and
rattle during the move.
5. Raise the leveling legs so they don’t scrape the
floor. See “Level Refrigerator.”
6. Tape the doors closed and tape the power cord
to the back of the refrigerator. When you get to
your new home, put everything back and refer
to the “Installation Instructions” section for
preparation instructions.
Reinstalling/Using Refrigerator
Again
If the refrigerator has been placed in a horizontal
or tilted position for any period of time wait
4 hours before plugging it in to allow the oil to
settle into the compressor.
1. Clean refrigerator. See “Cleaning.”
2. Place refrigerator in desired location and level.
See “Installation Instructions.”
WARNING
Plug into a grounded 3 prong outlet.
Do not remove the ground prong from the
power cord plug.
Do not use an adapter.
Do not use an extension cord.
Failure to do so can result in death,
fire or electrical shock.
3. Plug into grounded 3 prong outlet.
Fire or Explosion Hazard
Electrical Shock Hazard
Loading ...
Loading ...