Loading ...
Loading ...
Loading ...
WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON
Disconnect from electricity and gas supplies before servicing. Check appliance is safe when you have nished.
34
ArtNo.320-0020 Oven back fixing screws
Pull cooker forward to gain access to the cover box at
the rear of the cooker. Remove the screws securing the
cover and lift clear. The oven thermostat capillary is
clamped to the oven back sheet with an earthing plate.
Remove the screws and plate (Fig.9-6).
Remove the two screws securing the thermostat body
to the control panel at the front of the cooker. Remove
the assembly.
Fit new thermostat. Reassemble in reverse order.
Ensure that the phial is clipped to the oven back with
the phial centrally positioned between the clips.
Ensure that the thermostat capillary is clamped to the
oven back sheet with an earthing plate.
Check operation of thermostat.
Right-hand oven
From inside the oven remove the two screws holding
the thermostat phial to the oven fan cover at the rear of
the oven.
Remove the four screws that secure the fan cover
(Fig.9-5) then remove the fan cover.
The oven thermostat capillary is clamped to the right
hand rear upright with an earthing plate (Fig.9-6).
Remove the screws and plate.
Feed the thermostat capillary out of the oven.
Disconnect wiring from thermostat. Remove the two
screws holding thermostat to mounting panel. Fit new
thermostat and reassemble in reverse order.
Ensure that the phial is clipped to the oven back with
the phial centrally positioned between the clips.
Ensure that the thermostat capillary is clamped to the
right hand rear upright with an earthing plate.
Check operation of thermostat.
5.2 To Remove an Oven Element Thermal Cut-out
DISCONNECT FROM THE ELECTRICITY SUPPLY.
Pull the cooker forward to gain access to the cover
box. Undo the cover screws and lift clear. The cut-out
is located on the earth plate beside the oven element
connections. Disconnect the cut-out wiring. Undo the
xings that secure the cut-out to the earth plate and
remove.
Fit the replacement control and reassemble in reverse
order.
5.3 To Remove an Oven Inner Back
DISCONNECT FROM THE ELECTRICITY SUPPLY.
Open the door and remove the shelves. Remove the
screws and washers securing the inner back to the back
of the oven (Fig.9-5). Carefully lift away the inner back.
Reassemble in reverse order making sure that the
screws and washers are fully tightened.
Thermostat capilary
Earthing plate
Fig.9-6
Fig.9-5
Element xing screws
ArtNo.321-0005 Fan oven element
Fig.9-7
Loading ...
Loading ...
Loading ...