Loading ...
Loading ...
Loading ...
Black plate (58,1)
北米Model "A1140BE-A" EDITED: 2012/ 6/ 20
1-34 Seat, seatbelt and SRS airbags
installing a child restraint system only on
the rear seat window-side seating posi-
tions. For each window-side seating posi-
tion, two lower anchorages are provided.
Each lower anchorage is located where
the seat cushion meets the seatback.
*: If equipped
The tether anchorages (upper an-
chorages) are provided at the locations
shown in the above illustration. For de-
tails, refer to “ Top tether anchorages” F1-
35.
To install a child restraint system using
lower and tether anchorages, perform the
following procedure.
WARNING
Before installing a child restraint
system, be sure to confirm that the
seatback is s ecurely locked into
place. Otherwise, in an ac cident,
serious injury or death could result.
1. Shake the seatback slightly to confirm
that it is securely locked into place.
– For 5-door models, it is possible to
check whether the seatback is locked
visually. If the seatback is locked into
place, the red colored unlocking mar-
ker which is attached to the bottom of
the lock release knob is invisible. For
details, refer to “5-door models” F1-
11.
2. You will find marks “ ” at the bottom of
the rear seat seatbacks. These marks
indicate the positions of the lower an-
chorages (bars).
Remove the covers and locate the lower
anchorages (bars).
3. Remove the rear seat head restraint.
For details, refer to “Rear windows side
seating position” F1-8.
Loading ...
Loading ...
Loading ...