Loading ...
Loading ...
Loading ...
Black plate (252,1)
北米Model "A1140BE-A" EDITED: 2012/ 6/ 20
5-32 Audio
NOTE
. The Bluetooth
®
audio function may
not operate properly under the follow-
ing conditions.
– The device is turned off.
– The battery of the device has run
down.
– The device is not connected to
the system.
– The device is behind the seat or
in the glove box.
– A metal material is covering or
touching the device.
. Depending on the type of device that
is used, operation and sound volume
may be different from normal use of
those devices.
. The sound quality may degrade due
to the influence of the device that is
connected to the system or the circum-
stances of the Bluetooth network.
. When another Bluetooth
®
device is
simultaneously connected, noise may
be heard.
& Media format
Bluetooth
®
audio devices cannot be
connected if they are not compatible with
the following Bluetooth
®
profiles.
. A2DP (Advance d Audio Distribution
Profile)
. AVRCP (Audio/Video Remote Control
Profile)
& Setting Bluetooth
®
audio
“MENU” button
(type A audio)
“TUNE/TRACK/CH”
dial
Type A audio:
1. Select the “BT-A SETUP” menu by
pressing the “MENU” button. For details,
refer to “Other settings (type A audio)” F5-
8.
2. Perform the following procedure by
operating the “TUNE/TRACK/CH” dial
while “BT-A” is displayed.
Type B audio:
1. Select the “BT Audio Setup” menu by
operating the “TUNE/TRACK/CH” dial. For
details, refer to “Audio settings (type B
audio)” F5-8.
2. Perform the following procedure by
operating the “TUNE/TRACK/CH” dial
while “BT Audio” is displayed.
NOTE
You cannot set Bluetooth
®
audio while
driving.
! Registering (pairing) device
NOTE
Only one device can be registered.
1. Select the following menu.
–“PAIR AUDIO” (type A audio)
–“Pair Audio Player” (type B audio)
If a device is already registered, “MEM-
ORY FULL ” is displayed and the mode
changes to the Bluetooth
®
audio setting
mode.
2. After the passkey is shown on the
display, input the passkey into the device.
– If you input the correct passkey,
“PAIRED” is displayed and the regis-
tration procedure is finished.
– If you input an incorrect passkey,
“FAILED” is displayed, the registration
procedure was not successful and the
mode changes to the Bluetooth
®
audio setting mode.
NOTE
After the ignition switch is turned to the
“LOCK” position, the registered device
is not automatically connected to the
system even if the ignition switch is
Loading ...
Loading ...
Loading ...