Faber 5980400 (BK SLIDER) Inca Hc Hi-lo 72

User Manual - Page 8

For 5980400 (BK SLIDER).

PDF File Manual, 14 pages, Download pdf file

Loading ...
Loading ...
Loading ...
Version Hi-Lo SS 3/08 - Page 8
Blower On/Off Button ( M )
On/Off switch for the blower. Move the switch to "1" to turn
the blower ON and to "0" to turn it OFF.
Blower Speed Button ( V )
Set the blower speed control to "1" for LOW speed, "2" for
MEDIUM speed and "3" for HIGH speed.
Cleaning
The metal grease lters should be cleaned frequently in hot
detergent solution or washed in the dishwasher. Stainless
steel cleaner should be used on stainless rangehoods. Abra-
sives and scouring agents can scratch rangehood nishes
and should not be used to clean nished surfaces.
Replacing the Halogen Lights
Before attempting to replace the lamps, make sure that the
light switch is turned off, and that the other lamps have had
sufcient time to cool. Halogen bulbs burn extremely hot
and serious injury could result from touching a hot bulb.
Remove the 2 screws (as indicated in FIGURE 9) that hold
the light support and gently pull the support down from the
hood. Remove the lamp from the light support and replace
with new lamp. Replace the light support and x it into place
with the 2 screws.
An alternative method to replace the lamps is to use a 1 1/4"
suction cup (FIGURE 10). Attach the suction cup to the bulb and
pull rmly down on the bulb and replace with a new lamp.
WIRING DIAGRAM
• This rangehood uses 20 watt Halogen Lamps.
FIGURE 9
USE AND CARE INFORMATION
This rangehood system is designed to remove smoke, cook-
ing vapors and odors from the cooktop area.
For Best Results
Start the rangehood several minutes before cooking to
develop proper airow. Allow the unit to operate for several
minutes after cooking is complete to clear all smoke and
odors from the kitchen.
0 1 0 1 0 1 2
LM V
Rangehood Control Panel
The control panel, located on the right-hand side under the
canopy. The position and function of each control button is
indicated in FIGURE 8.
Light On/Off Button ( L )
On/Off switch for the halogen light. Move the switch to "1"
to turn the light ON and to "0" to turn it OFF.
FIGURE 8
FIGURE 10
Loading ...
Loading ...
Loading ...