Loading ...
Loading ...
Loading ...
46
EN
English
Other Operations
6 After completing settings, press the MENU button
to return to the normal display.
To return to operating mode:
÷ To return to normal operation from the [POWER
MANAGEMENT] function’s standby mode, either operate
your computer or press the STANDBY/ON button on
this unit or the remote control unit once.
÷ To return to normal operation from the [AUTO POWER
OFF] function’s power off condition, press the STANDBY/
ON button on the unit or on the remote control unit.
Setting the Orbiter (ORBITER)
The function gradually moves the display position of the
screen after a set amount of time (approximately every 8
minutes, the screen position is moved at random
horizontally or vertically).
When displaying a still image, setting [ORBITER] to [ON]
helps prevent the screen from being burnt with a lag image.
÷ This function is not supported when using the
multiscreen function or menu display.
MENU
2/3
5/∞
SET
1 Press the MENU button to display the menu
screen.
STANDARD INPUT1
PICTURE SCREEN SETUP OPTION
CONTRAST
BRIGHTNESS
COLOR
TINT
SHARPNESS
MPEG NR
DNR
CTI
MID
MID
ON
PICTURE RESET
ENTER
SET
EXIT
MENU
:
0
:
0
:
0
:
:
:
:
0
:
0
Other Operations
MENU
5/∞
SET
2/3
Display operating panel Remote control unit
2 Use the 2/3 buttons to select [OPTION].
STANDARD INPUT1
:
:
ENERGY SAVE
POWER MANAGEMENT
:
OFF
:
AUTO POWER OFF DISABLE
:
ORBITER OFF
:
MASK CONTROL ON
:
INPUT1 SELECT D-SUB
:
SR
+
MODE OFF
STANDARD
LANGUAGE ENGLISH
ENTER
SET
EXIT
MENU
PICTURE SCREEN SETUP OPTION
3 Use the 5/∞ buttons to select [ORBITER], and
press the SET button.
STANDARD INPUT1
:
:
ENERGY SAVE
POWER MANAGEMENT
:
OFF
:
AUTO POWER OFF DISABLE
:
ORBITER OFF
:
MASK CONTROL ON
:
INPUT1 SELECT D-SUB
:
SR
+
MODE OFF
STANDARD
ENGLISH
ENTER
SET
EXIT
MENU
PICTURE SCREEN SETUP OPTION
LANGUAGE
4 Press the 2/3 buttons to activate the setting.
SET
SET
EXIT
MENU
OFF
:
ORBITER
The factory default setting is [OFF].
Each time the button is pressed, the setting alternates
as follows:
5 Press the SET button.
[ORBITER] is set, and you return to the display shown
in step 3.
6 After completing settings, press the MENU button
to return to the normal display.
Note
The [ORBITER] setting affects all input sources.
3 OFF 2
3 ON 2
Loading ...
Loading ...
Loading ...