Loading ...
Loading ...
Loading ...
41
EN
SPECIFICATIONS
instax SP-3
Recording method 3-color exposure with OLED
Film FUJIFILM Instant Film “instax SQUARE” (Purchased separately)
Photo capacity 10 prints/pack
Image size 62 mm×62 mm/2.4 in.×2.4 in.
Supported image size 800×800 dots
Printing resolution 12.5 dots/mm (318 dpi, 80 μm dot pitch)
Printing levels 256 levels per color (RGB)
Interface Standard compliance: IEEE802.11b/g/n
Operation frequency: 2412 MHz to 2462 MHz (11 ch)
Supported image format JPEG, PNG
Printing time Image recording - photo output (fed out): Approx. 13 sec.
Approximate printing
capacity
Approx. 160 prints (Based on our test conditions)
* Varies depending on the conditions of use.
Power supply NP-50 (1 piece)
Charging time Approx. 3 hours (Varies depending on battery remaining level)
Power consumption 3 W
Operating temperature
+5°C to +40°C/+41°F to +104°F (no condensation)
Dimensions/Weight 116 mm × 130.5 mm × 44.4 mm/4.6 in. × 5.1 in. × 1.7 in. (excluding projections)
312 g/11 oz. (without battery and film pack)
Supplied accessory USB cable
(BOB711, Length: 1 m/3.3 ft.), ferrite core
* Specifications above are subject to change for improvement.
Loading ...
Loading ...
Loading ...