Loading ...
Loading ...
Loading ...
8.
M D
Hard water can leave mineral deposits
that create scale build-up on the interior
of the kettle. If mineral deposits occur,
follow these steps:
1. Fill the kettle halfway with water.
2. Following the instructions in B W
listed above, bring the water to a boil.
3. Add one cup of white vinegar to the water in
the kettle.
4. Allow the mixture to soak overnight.
5. Empty the mixture and rinse out the kettle.
6. Refill the kettle with water only. Bring it to a boil
and empty again. Repeat as needed.
B W
1. Place power base on a sturdy, level and dry
surface.
2. Open the kettle lid and fill with water through
opening. Water must be filled between the MIN
and MAX levels.
3. Close the lid.
4. Place the kettle onto the power base.
5. Plug the power cord into an available 120V AC
wall outlet.
6. Press the Start/Select button to turn the unit on.
7. Turn the dial to select function 01: Boil.
8. Press the Start/Select button. The unit will beep
and begin to heat.
9. Once the water reaches a boil, the unit will beep
and turn o automatically.
10. If keep warm is desired, before it reaches boiling,
press Keep Warm Setting button to set the desired
keep warm temperature. After it reaches a boil it
will switch to 16:Keep Warm automatically.
11. Using the handle, lift the kettle o the power base
to serve. Do not touch the glass body, as it will be
hot.
Caution:
Helpful
Hints:
Using distilled water
will help to prevent
the buildup of mineral
deposits.
The glass portions of
the kettle will become
extremely hot during
use and remain hot for
sometime after. Do not
touch the glass body or
lid until the kettle has
cooled completely.
· Never open the lid while
water is boiling.
Note:
Loading ...
Loading ...
Loading ...