Loading ...
Loading ...
Loading ...
6.
B F U
T C
1. Read all instructions and important safeguards.
2. Remove all packing materials and make sure that
the product has been received in good condition.
3. Take care to keep the electrical components on
the exterior of the kettle dry, wipe out the interior
of the kettle with a damp cloth. If your hand will
not fit inside the kettle, swish warm, soapy water
around in the interior of the kettle with the lid
closed.
4. Rinse out the inside of the kettle thoroughly with
water.
5. With a damp cloth, gently wipe o the exterior of
the kettle. Do not wipe o electrical components
as this may cause damage to the unit.
6. Dry all parts completely.
7. It is recommended to run your kettle through
one boiling cycle before using it to consume
beverages. Following the instructions in B
W on page 8, boil one kettle of water. When
water has boiled, pour it out and rinse the inside
of the kettle once more. The kettle is now ready
for use.
1. Wipe the exterior of the kettle with a damp cloth,
taking care to avoid the electrical components.
2. Clean the interior of the kettle with a soft sponge
and warm, soapy water. If your hand does not
fit in the lid opening, swish warm, soapy water
around inside the kettle with the lid closed.
3. Rinse any remaining soapy water from the kettle.
4. Drain.
Note:
· Any other servicing
should be performed by
Aroma® Housewares.
Before using for the first time, it is recom-
mended to clean the interior of the kettle
thoroughly. Please follow the procedures
below before using the kettle:
Caution:
Always unplug the
kettle and allow it to
cool completely before
cleaning.
Never attempt to
disassemble the kettle or
the power base.
Never immerse the
kettle, power cord, plug
or power base in water.
Always take care not
to allow electrical
components to come
into contact with water.
Do not use abrasive
cleaners or scouring
pads of any kind on the
kettle or power base.
This will cause damage
to the finish and may
create a risk of electrical
shock.
Loading ...
Loading ...
Loading ...