Loading ...
Loading ...
Loading ...
SERVICING AND MAINTENANCE 447
6. Reverse the procedure to install the bulb
and housing.
Center High Mounted Stop Lamp (CHMSL)
With Cargo Lamp
See below steps to replace:
1. Remove the two screws holding the
housing/lens to the body as shown.
CHMSL Mounting Screw Locations
2. Separate the connector holding the housing
and wiring harness to the body.
3. Turn the desired bulb socket a quarter turn
and remove the socket and bulb from
housing.
4. Pull the desired bulb straight from the
socket.
CHMSL Bulb And Socket
Outside Bulbs: Cargo Lamps
Inside Bulb: Center High Mounted Stop
Lamp
5. Reverse the procedure for installation of
bulbs and housing.
Cab Top Clearance Lamps — If Equipped
See below steps to replace:
1. Remove the screws from the top of the
lamp.
Screw Location From Clearance Lamp
CAUTION!
Do not contaminate the bulb glass by
touching it with your fingers or by allowing it
to contact other oily surfaces. Shortened bulb
life will result.
CAUTION!
Do not contaminate the bulb glass by
touching it with your fingers or by allowing it
to contact other oily surfaces. Shortened bulb
life will result.
8
21_DJD2_OM_EN_USC_t.book Page 447
Loading ...
Loading ...
Loading ...