Loading ...
Loading ...
Loading ...
Understanding the Control Panel
The control panel may differ slightly from the illustration below.
Control buttons
When the button is pushed to change operation modes, the unit will make a beeping sound to
indicate that it is changing modes.
1 Continue Button
Press to activate the continuous dehumidifying operation.
2 Filter Button
The Check Filter feature is a reminder to clean the Air Filter for more efficient operation.
The Filter light will illuminate after 250 hours of operation. To reset after cleaning the filter,
press the Filter button and the light will go off.
3 Fan Button
This button controls the fan speed. Press to select either High or Normal fan speed. Set the
fan control to High for maximum moisture removal. When the humidity has been reduced
and quieter operation is preferred, set the fan control to Normal.
4 Power Button
Press to turn the dehumidifier on and off.
Humidity Set Control Buttons
5, 7 Up/Down Buttons
TIMER Set Control Buttons
Use the Up/Down buttons to set the Auto start and Auto stop time from 0.0 to 24.
The humidity level can be set within a range of 35%RH (Relative Humidity) to 85%RH
(Relative Humidity) in 5% increments.
For drier air, press the button and set to a lower percent value (%).
For moister air, press the button and set a higher percent value (%).
6 Timer Button
Press to initiate the Auto start and Auto stop feature, in conjunction with the and buttons.
Display: Shows the set % humidity level from 35% to 85% or auto start/stop time (0~24)
while setting, then shows the actual (± 5% accuracy) room % humidity level in a range of
RH (Relative Humidity) to 90%RH (Relative Humidity).
3
Low fan
indicator light
Auto defrost operation on
indicator light
High fan
indicator light
Filter
Cont.
Fan
Timer
Filter
Full
Cont.
On Off
Turbo
Normal
Auto defrost
1
2
45
6
7
Clean filter
indicator light
Bucket full
indicator light
Continuous
operation on
indicator light
Timer on/off
indicator light
4
Loading ...
Loading ...
Loading ...