Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/95553997-no534/bg8.png)
Mark Levinson
4
Installation Considerations
The N
o
-
536 requires special care during installation to ensure optimal
performance. Pay particular attention to instructions included in this
section and to precautions included throughout this owner’s manual.
DO save all packing materials for possible future shipping needs.
DO inspect the amplier for signs of damage during shipment. If damage is
discovered, contact your authorized Mark Levinson dealer for assistance in
making appropriate claims.
DO locate and remove the accessory bag from the carton. Make sure it
contains all of the items listed in the “What’s in the Box” table on the
previous page. If not, contact your authorized Mark Levinson dealer.
DO NOT attempt to lift or move the power amplifier without
adequate assistance. The shipping weight of the amplifier exceeds
what a single person should lift alone. To avoid injury or damage to
the unit, at least two people are required to lift or move the amplifier.
Knit white gloves with special gripping surfaces on the palms and
fingers are included with the amplifier. Wear these gloves when
lifting or moving the amplifier.
DO install the power amplier on its own shelf for proper ventilation.
DO install the amplier chassis on a solid, at, level surface.
DO install the power amplier close to associated components to keep
interconnecting cables as short as possible.
DO select a dry, well-ventilated location out of direct sunlight.
DO allow at least 3 to 4 inches (8 to 10cm) of clearance above and on each
side of the amplier for proper heat dissipation.
DO allow at least 6 inches (15cm) of clearance behind the amplier so that
the power cord and cables have space to bend without becoming crimped
or strained.
DO NOT place the amplier chassis on a thick rug or carpet or cover the
amplier with a cloth, as this might prevent proper cooling.
DO NOT obstruct the ventilation holes on the top and bottom of the
chassis or reduce airow through the amplier.
DO NOT place the amplier chassis near low-level components.
The power amplier is capable of producing large output currents and
hence signicant magnetic elds, which can induce noise in sensitive
components.
DO NOT expose the power amplier to high temperatures, humidity,
steam, smoke, dampness, or excessive dust. Avoid installing near radiators
and other heat-producing appliances.
MAKE SURE all components are properly grounded. Do not defeat
the safety purpose of polarized or grounding-type plugs with
“ground-lifter” or “cheater” adapters. Doing so may cause dangerous
voltage to build up between components, which can result in
personal injuries and/or product damage.
Unpacking
Caution!
Placement and
Ventilation
Warning!
Loading ...
Loading ...
Loading ...