Loading ...
Loading ...
Loading ...
- 25
When connecting you should:
. Turn over the hob, glass side against the work top, taking care to protect the glass!
. Open the cover in the following sequence:
. find the two tabs located on the sides,
. put the blade of a flat screwdriver in front of each tab, push in and press,
. remove the cover.
) Shunts
) x 3
)
. connect the power supply cable:
. comply with the markings on the terminal board and the information of the table below
and install the shunts (the shunts, inserted in the terminal board, make a bridge between
two terminals).
. strip the end of each conductor and attach them to the terminals, complying with the
information given in the table :
. unscrew the cable clamp, pass the lead through the cable clamp.
When you have finished the connection operation to the appliance terminals, tighten the
cable clamp and close the cover.
Make sure the terminal board screws are tight.
~V032ESAHPELGNIS~2V004ESAHPEERHT
ESUF
A02A61
ELBACELBAC
ELBAC
ELBACELBAC F-RR50HroF-VV50H
²mm5,2G3
F-RR50HroF-VV50H
²mm5,1G4
noitcennoC
lanimretot
kcolb
:tnuhS
egdirbaekam
tnuhsagnisu
:1L
esahP
&2-1tnuhS
3-2tnuhS
:N
lartueN
5-4tnuhS
:T
htraE
:1L esahP 1
:2L
esahP
3-2tnuhS
:N
lartueN
5-4tnuhS
:T
htraE
Loading ...
Loading ...
Loading ...