Loading ...
Loading ...
Loading ...
CONTENTS
Accessories
Names of
Parts
Before You
Begin
Changing
Needles and
Light Bulb
Threading
Stitch
Samples and
Needle Chart
Changing
Presser Feet
Basic
Sewing
Caring for
Your
Machine
Trouble
Shooting
15
Basic Sewing (3)
Note
• Make sure power is off before changing feet.
• When attaching zippers to stretch fabrics, use the pin feed method
and adjust foot pressure accordingly.
Zipper Foot
1 Attach zipper foot.
2 Turn hand wheel to lower needle
and adjust position of foot to
needle.
5 Sew zipper onto fabric along
mark.
Make sure the needle does
not strike the metal part of the
zipper when sewing. The
needle may break and cause
injury.
3 Line up zipper to the section of
fabric it will be attached to, and
mark the base of the opening on
the fabric. It should be set ap-
proximately 0.5 cm below zip
stop.
4 Fold hem about 0.2 cm from
mark, and make a mark along the
edge. Separate the seam allow-
ance.
A
0.5 cm
Stop
Slide
Base of
Opening
0.2 cm
6 Line up folded seam to stitches.
7 Change position of zipper foot.
8 Turn hand wheel to lower needle
and make sure the needle and
position of the foot are lined up
properly.
9
Baste zipper onto fabric and sew
along edge with fabric right side up.
✽ Reinforce base of opening by
sewing over it twice.
✽ If the zipper slide gets in the way,
lower the needle all the way
through the fabric, lift the foot, and
move the slider out of the way.
B
Loading ...
Loading ...
Loading ...