Loading ...
Loading ...
Loading ...
49-80694-3 7
USING THE RANGE:6XUIDFH8QLWV
Surface Units
WARNING
FIRE HAZARD: Never leave the range unattended with the cooktop on medium or high settings.
.HHSIODPPDEOHLWHPVDZD\IURPWKHFRRNWRS7XUQRIIDOOFRQWUROVZKHQGRQHFRRNLQJ)DLOXUHWR
follow these instructions can result in fire, serious injury or death.
Throughout this manual, features and appearance may vary from your model.
Surface Unit Cook Settings
The cooktop offers 19 power levels. Power levels range
from "L" (Lo) to "H" (Hi) in precise half-step increments.
For example: L, 1, 1 ½, 2, 2 ½, and up to HI.
Power Level “L”, the lowest setting, is recommended for
keeping food warm.
The power level increases one-half level with each touch.
NOTE: When changing from a high heat setting to a
lower heat setting, the surface unit may stop glowing.
This is normal. The unit is still on and hot.
NOTE: This cooktop has a rapid heat-up feature. If the
cooktop is cool when turned on, it will glow red for a short
period of time until the desired power setting is reached.
The power level with a fraction
indicates the additional half-step
setting. You may hear clicking
sounds indicating the control is
maintaining your desired setting.
Single Surface Unit—Cook Settings
To turn on a single surface unit:
1. Touch the On/Off pad; then touch the + or – pad.
8VHWKH+ or – pad to choose the desired power
setting.
To use the Melt feature:
Touch the On/Off pad; then
touch Melt. The element
will automatically set to a
predetermined setting and
“L” will be displayed. To turn
off a single surface unit,
touch the On/Off pad again.
Or
Multi-Ring Burner (can be dual or triple, depending on model)
1. Touch the On/Off pad for the right front surface unit
or the left front surface unit.
8VHWKH+ or – pad to choose the desired power
setting.
3. Touch the Burner Size pad as needed to select the
desired burner size.
The light next to the Burner Size pad indicates which
size the surface unit is on. To turn the surface unit off,
touch the On/Off pad.
Loading ...
Loading ...
Loading ...